COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

Component CAS -No Weight % Tri ro ylene glycol monometh I ether 25498-49-1 1-5 Sodium metasilicate pentahydrate 10213-79-3 1-5 2,6,8-Trimethyl-4-nonyloxy polyethylene ox ethanol 60828-78-6 1-5 Trisodium phosphate 7601-54-91-5 Ingestion Metasilicic acid 7699-41-4 1-5 4. FIRST AID MEASURES General advice Do not get in eyes, on skin or on clothing. Do not breathe vapors or spray mist. Eye Contact Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get medical attention immediately. Skin Contact Remove immediately all contaminated clothing. Wash off immediately with plenty of water for at least Methods for Containment 15 minutes. Get medical attention immediately. Inhalation Move to fresh air. In case of shortness of breath, give oxygen. If breathing has stopped, apply artificial respiration. Get medical attention immediately. Ingestion Drink 1 or 2 glasses of water. Do NOT induce vomiting. Get medical attention immediately. Never Neutralizing Agent give anything by mouth to an unconscious person. Notes to physician The product causes burns of eyes, skin and mucous membranes. Control of circulatory system, shock therapy if needed. S. FIRE -FIGHTING MEASURES Flash Point Does not flash Method Not applicable Flammability Limits in Air % Hydrogen, by reaction with metals. Upper 75 Lower 4 Suitable Extinguishing Media Water spray. Carbon dioxide (CO2). Foam. Dry chemical. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Specific hazards arising from the chemical Material can create slippery conditions. Contact with metals may evolve flammable hydrogen gas. Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure -demand, MSHA/NIOSH (approved or equivalent) and full protective gear. NFPA Health 3 Flammability 1 instability 0 HMIS Health 3 Flammability 1 instability 0 T. HANDLING AND STORAGE Handling Do not get in eyes, on skin or on clothing. Do not breathe vapors or spray mist. Storage Store in original container. Keep containers tightly closed in a dry, cool and well -ventilated place. Freezing will affect the physical condition but will not damage the material. Thaw and mix before using. Storage Temperature Minimum 36 IF / 2 °C Maximum 120 IF 149 °C Storage Conditions Indoor X Outdoor Heated Refrigerated 8. EXPOSURE CONTROLS I PERSONAL PROTECTION Exposure Guidelines This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Engineering Measures Ensure adequate ventilation, especially in confined areas. Engineering control measures should be used in preference to personnel protective equipment wherever possible. Personal Protective Equipment Eye/Face Protection Tightly fitting safety goggles. Face -shield. Skin Protection Wear suitable protective clothing, Impervious gloves. RECEIVED DEC 0 4 2015 ENVIRONMENTAL HEALTH DEPARTMENT s. ACCIDENTAL RELEASE MEASURES Personal Precautions Use personal protective equipment. Prevent further leakage or spillage if safe to do so. Material can create slippery conditions. Environmental Precautions Avoid release of neat product into surface water and sanitary sewage system. Methods for Containment Contain spillage, soak up with non-combustible absorbent material, (e.g sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local I national regulations (see section 13). Methods for Cleaning Up Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust) Neutralizing Agent Acetic acid, diluted. T. HANDLING AND STORAGE Handling Do not get in eyes, on skin or on clothing. Do not breathe vapors or spray mist. Storage Store in original container. Keep containers tightly closed in a dry, cool and well -ventilated place. Freezing will affect the physical condition but will not damage the material. Thaw and mix before using. Storage Temperature Minimum 36 IF / 2 °C Maximum 120 IF 149 °C Storage Conditions Indoor X Outdoor Heated Refrigerated 8. EXPOSURE CONTROLS I PERSONAL PROTECTION Exposure Guidelines This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Engineering Measures Ensure adequate ventilation, especially in confined areas. Engineering control measures should be used in preference to personnel protective equipment wherever possible. Personal Protective Equipment Eye/Face Protection Tightly fitting safety goggles. Face -shield. Skin Protection Wear suitable protective clothing, Impervious gloves. RECEIVED DEC 0 4 2015 ENVIRONMENTAL HEALTH DEPARTMENT