COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

DEC -14 -leg 09:41 ID:L# TOLEDCi TEL Fl0:419-24oR21 tt509 Pati TITANIUM TETRACHLORIDE breathing, supplemental oxygen may be given from a demand type or continuous -flow inhaler, preferably with a physician's advice. Get medical attention immediately. The recommendations described in this section are provided a general guidance for minimizing exposure when handling this product. Because use conditions will vary depending upon customer applications, specific safe handling procedures should be deve.ioped by 2 intended use onconknowledgeable t onsedgand ` of the equipment. During the development of safe handling procedures, Consideration should be given to the need for cleaning of equipment and piping systems to render them nonhazardous before maintenance and repair activities are performed, Waste resulting from these procedures should be handled in accordance with SECTION XIV: DISPOSAL OF MATERIAL/ CONTAINER. ENGINEERING CONTROLS: In those cases where engineering controls are indicated by the use conditions, the following traditional exposure control techniques may be used to effectively minimize employee exposure: local exhaust ventilation, enclosed system design or process isolation and remote control in combination with appropriate use of personal protective equipment. reduce potential for exposure INGESTION: All food must be kept in a separate area away from the storage/use location. Eating, drinking, smoking and carrying of tobacco products must be prevented in areas where there is a potential for exposure to this material. Before eating, drinking or smoking, hands and face must be thoroughly washed. SHIN CONTACT: Skin contact with liquid or its aerosol must be prevented through the use of impervious clothing gloves and footwear selected with regard for use condition exposure potential. Safety showers, with quick opening valves which stay open, should be readily available in all areas where the material is handled or Water should stored. insulated be supplied and heat -traced lines through Prevent freeze ups in cold weather. to EYE CONTACT: Eye contact with liquid or aerosol must be prevented through the use of chemical safety glasses, goggles or a face shield selected with regard for use condition exposure potential. Eye wash fountains, or other means of washing the eyes with a gentle flow o tap water, should be readily availab in all areas where this material handled or stored. Water should t supplied through insulated an heat -traced lines to prevent freeze-up in cold weather, respirators INHALATION: This material is normally handled under closed process conditions. In an emergency situation where adequate ventilation is not available and use conditions could generate vapor or hydrogen chloride fumes, inhalation must be prevented through the use of NIOSH -approved, acid -gas respirators with dust, mist and fume filters to reduce potential for exposure under the use conditions_ Where exposure potential under the use conditions necessitates a higher level of Protection, use a positive -pressure, air -supplied respirator. Page 4 of 6