Laserfiche WebLink
MATERIAL SAFETY DATA SHEET <br /> Product Name: Gold Seal® Component `13' <br /> MSDS-13005 <br /> Ingestion: Do not induce vomiting. Never give anything by mouth if the victim is <br /> rapidly losing consciousness, or is unconscious or convulsing. If <br /> vomiting occurs naturally, have victim lean forward to reduce the risk <br /> of aspiration. If breathing or the heart has stopped, trained personnel <br /> should immediately begin artificial respiration or CPR. Consult a <br /> physician immediately. <br /> Section 5: Fire Fighting Measures <br /> Flash Point: Not determined <br /> Method Used: N/A <br /> Flammable Limits: <br /> LFL: Not determined <br /> UFL: Not determined <br /> Extinguishinq Media: Water, carbon dioxide, dry chemical or foam. Expended liquids upon <br /> the aftermath of fire should be contained for disposal. Prevent <br /> contamination of streams and drinking supplies. <br /> Fire & Explosion Hazards: Sudden reaction and fire may result when the product is mixed with an <br /> oxidizing agent. <br /> Fire Fighting Equipment: In confined areas, firefighters must wear a self-contained breathing <br /> apparatus to avoid breathing vapors, carbon monoxide and nitrogen <br /> oxide fumes generated by combustion. Skin contact should be <br /> avoided. <br /> Hazardous combustion products would include oxides of carbon, <br /> nitrogen and phosphorous and acid halides. <br /> Section 6: Accidental Release Measures <br /> Action to Take for Dike spills to prevent spreading and contamination of surface waters, <br /> Spills/Leaks: ground waters and drinking supplies. Notify local health authorities <br /> and other appropriate agencies if such contamination should occur. <br /> Section 7: Handlinci and Storagle <br /> Must be protected from overheating and should ideally be stored at temperatures between 60°F-90°F <br /> (150C-320C). It should definitely be kept below 100°F (38°C) as exposure to temperatures above 100T <br /> (38°C) accelerates material degradation. It is advisable to keep the storage temperatures as low as <br /> possible within the above range, store the drums in a well ventilated area, and protect them from direct <br /> sunlight. Since component B can separate during storage, it should be mixed thoroughly prior to use, <br /> especially at higher temperature levels. <br /> Page 2 of 6 (B) <br />