Laserfiche WebLink
RECEIVED <br /> 22. FILL RISER CONTAINMENT SUMP TESTING SEP 2 9 2016 <br /> Facility is Not Equipped With Fill Riser Containment Sumps Lj <br /> Fill Riser Containment Sumps are Present,but were Not Tested❑ ENVIRONMENTAL HEAL <br /> Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Paagw1 r <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑ Vacuum ® Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: INCON TS-STS Equipment Resolution: 0.0001 <br /> Fill Sump#DSL 2 Fill Sump#TRANS Fill Sump# Fill Sump# <br /> FILTER <br /> Sump Diameter: 38" <br /> Sump Depth: 68" <br /> Height from Tank Top to Top of 18" <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 16" <br /> Electrical Penetration: <br /> Condition of sump prior to testing: FAIR FAIR <br /> Portion of Sump Tested 25" <br /> Sump Material: FG <br /> Wait time between applying 15 MIN 15 MIN <br /> pressure/vacuum/water and starting <br /> test: <br /> Test Start Time: 1:54 3:23 <br /> Initial Reading(R,): 32081 46584 <br /> Test End Time: 2:09 3:39 <br /> Final Reading(RF): 32088 46587 <br /> Test Duration: 15 MIN 15 MIN <br /> Chane in Reading(RF-R,): 0.0007 0.0003 <br /> Pass/Fail Threshold or Criteria: 0.002 0.002 <br /> Test Result: ® Pass L1 Fail ®Pass El Fail ❑Pass E] Fail ❑Pass ❑ Fail <br /> Is there a sensor in the sump? 0 Yes No Ll Yes Li No Lj Yes 0 No LJ Yes Ll No <br /> Does the sensor alarm when either <br /> product or water is detected? ®1'es El No El NA ®Yes El No[--]NA El Yes[-]No El NA El Yes El No El NA <br /> Was sensor removed for testing? Yes❑No NA Yes No NA ❑Yes No NA ❑Yes No❑NA <br /> Was sensor properly replaced and 0 Yes No NA Z Yes El No NA ❑Yes Lj No Lj NA Yes Lj No❑NA <br /> verified functional after test <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> Secondary Containment Test Results 15 of 15 <br />