Laserfiche WebLink
Product delivery can at all times be made safely by following the standard procedures listed here: <br /> a. No matter where the delivery is to be made,the driver must first check the bill of lading and truck <br /> to determine the correctness of the load. <br /> b. The driver should obtain a route map and any special delivery instructions. <br /> c. The tight-fill product delivery elbow nozzle of system will be provided. If you encounter a <br /> situation where you do not have proper fittings or where systems are under construction,and the <br /> delivery would result in the authorized release of product, do not make the delivery. Contact <br /> your supervisor for further instructions. <br /> d. On arrival at any delivery location, the driver must: <br /> • Observe the traffic patterns and verify conditions for a safe delivery exists at the tank fill <br /> location. <br /> • Spot the truck at the tank fills. <br /> • Set the parking brake. <br /> • Shut down the engine and all electrical equipment(headlights, radio,etc.) <br /> • Place transmission in lowest(or parking)gear. <br /> • Block wheels and chock blocks. <br /> • Double-check the truck load and sales delivery ticket to be sure of the correct location and <br /> the proper product. Note that the owner or authorized representative of the facility must be <br /> present at all times during delivery. <br /> • Check fill connection for products tags. If not clearly identified, do not deliver-call <br /> supervisor for instructions. <br /> • Check tank containment buckets at fill for presence of liquid. If present,drain liquid using <br /> the integral plunger in the bucket. <br /> • Make inspection around truck for trapped parked cars or potential for traffic to encroach the <br /> filling area. <br /> • Set out traffic cones on all deliveries to protect fitting and hoses from damage by traffic in <br /> the area. <br /> • Cover any drains in the immediate area. <br /> • Stick-gauge each tank to verify that the amount of product ordered can be delivered without <br /> overfill. If the load won't fit,make no delivery--call your supervisor! Only unload product <br /> into specified storage facilities. <br /> 7996.001 [SHK/bgl <br />