Laserfiche WebLink
• <br /> WESTERN FIBERGLASS, INC. 1-800-688-3375 <br /> FIBERGLASS SUMP REPAIR PROCEDURE <br /> If repair becomes necessary to a FRP sump because of damage or a misplaced hole or <br /> penetration, repair can be effected easily. <br /> If damaged, remove the damaged area by cutting out with a suitable tool, Saber saw, <br /> Saws-All, diamond tipped cutting wheel or hole saw. <br /> NOTE: FOLLOW ALL SAFETY PRECAUTIONS AND PROCEDURES BEFORE <br /> ENTERING OR OPERATING POWER EQUIPMENT WITHIN A SUMP. <br /> Order replacement piece of material that is 2" larger, length and width or diameter. For <br /> example, If you cut a 12" X 12" hole, overlay a 16" X 16" piece. If you cut a 6" diameter <br /> hole, overlay a 10" circular piece of the same material. You must use the same material <br /> as the sump you are repairing. <br /> Attach repair piece with self tapping screws, supplied with piece by Western Fiberglass, <br /> Inc. and follow the bonding procedures as outlined in the tank sump installation <br /> instructions. <br /> You must use the same resin and fiberglass cloth material as was used in the <br /> manufacture of your sump. The resin and fiberglass materials used to manufacture <br /> Western Fiberglass sumps are specifically designed for use with fuels and are not the same <br /> as fiberglass used for boats, cars or other uses. <br /> IF YOU HAVE ANY QUESTIONS, CALL 1-800-688-3375 MON-FRI 8-5 PST <br /> MSO F FICLWU,rWO RDBINDERISUMP;RE PAIRIJAN99 <br /> 70 <br />