Laserfiche WebLink
0 0 <br />IMPORTANT". All operating, setup and historical data will be lost, including data on the NVMEM card <br />if applicable, when the TLS console is cold booted. <br />1. Push the Battery Backup switch (SW1) down to the OFF position (ref. step 4 in Figure 6). <br />2. Restore AC power to the console. The console front panel display will cycle through the following screens: <br />CLEARING ALL RAM <br />SYSTEM COLD START <br />SYSTEM SELF TEST <br />SYSTEM STARTUP COMPLETE <br />Wait until the printer prints: <br />*** SYSTEM RESET *** <br />MMM DD, YYYY HH:MM XM <br />and the front panel display reads: <br />MMM DD, YYYY HH:MM:SS XM <br />RESTORE SETUP DATA: NO <br />3. Push the Battery Backup switch (SW1) up to the ON position. <br />4. Press the CHANGE key: <br />MMM DD, YYYY HH:MM:SS XM <br />RESTORE SETUP DATA: YES <br />5. Press the ENTER key: <br />RESTORE SETUP DATA: YES <br />PRESS <STEP> TO CONTINUE <br />6. Press the STEP key and the printer prints: <br />ARCHIVE UTILITY <br />RESTORE SETUP DATA <br />START TIME: <br />MM DD, YYYY HH:MM XM <br />