Laserfiche WebLink
Quickly andaccurately <br />detect the presence of <br />hydrocarbons or water. <br />Mag Sump Sensor <br />Veeder-Root's Mag Sump Sensor quickly <br />and accurately detects the presence and <br />amount of water and/or fuel in the <br />containment sump or dispenser pan. <br />Using proven magnetostrictive technology <br />to detect the presence of hydrocarbons and <br />water, the station (where allowed) remains <br />in operation when water alone is detected. <br />The sensor has fast reaction and recovery <br />times which both eliminate costly and <br />unwarranted service dispatches and sensor <br />replacements. This fast reaction and <br />recovery time, allows for quick and easy <br />periodic operability testing if required by <br />local agencies. <br />Where continuous monitoring of the sensor <br />position is required by law, site owners are <br />immediately notified if the sensor has been <br />moved from its proper position at the <br />bottom of the containment sump or <br />dispenser pan. <br />Alarm Conditions - Fuel Alarm, Water <br />Warning, Water Alarm, Installation Alarm <br />and Comm. Alarm are indicated by an <br />audible alarm, a displayed message and a <br />printed message on the TLS/EMC console. <br />They are also recorded as a part of the <br />TLS/EMC console Alarm History Report. <br />Temperature Rating <br />Storage: <br />-40 degrees C to + 60 degrees C <br />Operating: <br />-40 degrees C to + 60 degrees C <br />Cable Length: <br />10 feet <br />Sensor Dimensions: <br />Available in lengths of 12° and 24" (22" <br />and 34" total sensor lengths respectively) <br />Features & Benefits <br />Fuh pioiection with comprehensive alarm <br />conditions <br />• Fuel Alarm - triggered when fuel <br />reaches approximately 1.5" in height <br />• Water Warning, - triggered when water <br />level reaches approximately 1.7" in height <br />• Water Alarm - triggered when water <br />reaches user defined programmable height <br />• Installation Alarm - triggered when sensor <br />is moved from proper operating position <br />• Comm. Alarm - triggered when there is <br />no communication with the sensor <br />Optional sump Integrity Testing <br />• Allows for testing of sumps and pans without <br />removal of any equipment <br />Standard Models <br />Sump integrity Testing Models* <br />857080.211 <br />Nominal <br />Form No. (Product <br />Sensor Length <br />857080-111 Gasoline or <br />12" <br />Diesel <br />Gasoline or <br />857080-112 Gasoline or <br />24" <br />Diesel <br />Sump integrity Testing Models* <br />857080.211 <br />Gasoline or <br />12— <br />Diesel <br />857080-212 <br />Gasoline or <br />24 - <br />Diesel <br />Requires V26 or greater software <br />Form No. <br />Description <br />330020.012 <br />Universal Sensor <br />Mounting Kit <br />Fast fuel and water detection reaction and normal <br />state recovery times <br />• Proven industry accepted magnetostrictive <br />technology <br />• Enables easier and less time consuming <br />periodic operability tests <br />Station tip Iline <br />• If allowed by local regulation, station may <br />not have to slut down if water only is detected <br />• Proper position always monitored to ensure <br />greatest probability of leak detection <br />• Alarm history is maintained for compliance <br />reporting where required <br />Mag Sump Sensors are compatible with the follow- <br />ing consoles with Smart Sensor Card installed, and <br />Version 24 Software or greater. <br />Console <br />TLS-35ORIEMC MB1R <br />TLS -350 Plus/EMC Enhanced <br />TLS-3501EMC <br />For more information call <br />1-888-561-7942 <br />f ► �� VEEDER-ROOT © 2007 Veeder-Root Company • 125 Powder Forest Drive • Simsbury, CT 06070 • USA <br />Telephone: 860-651-2700 • Fax: 860-651-2714 • www.veeder.com <br />VR 13752 P/N 0576047-070 Rev.F VR 2/07 Printed in USA <br />