Laserfiche WebLink
US( SYSTEM PRINTSET INFORMATION <br /> I. Four complete sets of plans (To include specification sheets and/or equipment brochures if not on file). <br /> 2. Plans drawn to scale in non-erasable print. <br /> 3. Plot plan to show location and number of tanks. <br /> 4. Tank cross-sectional diagram included on prints submitted. <br /> 5• Detail of tank, piping system, excavation and cover. <br /> 6. Tank(s) and piping approved by a natio ally recognized independent testing organization. [Title 23, Subchapter 16, <br /> Article 3, Sec. 2651 (r) L 26351 <br /> 7. verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, eta [Section 2635 (b) (2)] <br /> g• Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)] <br /> 9. Tightness Test (NFPA 30) is required on both primary (10) and secondary (20) containment systema before covering. <br /> (Section 2635 (b) (6) b (7)] <br /> 10. Double walled tanks using pressure or vacuum testing to monitor the annular space. (Section 2635 (b) (7)I <br /> 11. NFPA 329 "Precision Test" required upon completion of installation with tank in operating condition. Test results to <br /> be submitted directly to PHS/EHD from the testing company or owner of facility. [Health 4 Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (g)] <br /> 12. TANK COMPOSITION <br /> TANK Y tl��. ` x B S 'l <br /> CAPACITY �(O. <br /> ,MANUFACTURER To If <br /> CCMPOS:TION <br /> MODEL <br /> PRODUCT <br /> C'RROSICR PROTECTION <br /> U.L. LISTED <br /> CC14PATIBILITY WITH 100% <br /> METHANOL <br /> 13. TANK(s) TO BE INSTALLED <br /> A. Steel-clad with fiberglass reinforced plastic. <br /> B. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). (Section 2635 (b) (4)] <br /> C. Fibergtass [Sections 2635 (3) and 2631 (p)] <br /> (1) Striker plate dim ions and materials. <br /> _ (2) Striker plate under all accessible openings. <br /> (3) Installation instructions require an air test and soap 'bubble test prior to installation. <br /> _ D. Ncn-clad steel tank [Section 2635 (b)] <br /> (1) Cathodic protection provided for entire tank, piping and coaporents (nuts, bolts, washers, <br /> etc.). <br /> _ (2) Approved by a corrosion engineer or N.A.C.E. technician. <br /> (3) Document stating inspection method and frequency (minimum semi-arvual inspection requirement). <br /> 4 <br />