Laserfiche WebLink
D. Results of Testing/ServicitO • <br /> Software Version Installed: _S, <br /> Complete the following checklist: <br /> Me"Yes ❑ No* Is the audible alarm operational? <br /> Ur'yes ❑ No* Is the visual alarm operational? <br /> es ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ❑ Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br /> W"N/A operational? <br /> EY Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ N/A monitoring system detects a leak, fails to operate or is electrically disconnected? If yes: which sensors initiate <br /> L <br /> positive shut-down? (Check all that apply) Tb"ump/rrench Sensors; El Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? 0`�es; ❑No. <br /> ❑ Yes ❑ o* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br /> Or N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> filI point(s)and operating ro rl ? If so,at what percent of tank capacity does the alarm trigger? % <br /> ❑ Yes* WYNo Was any monitoring equipment replaced? If yes, identify specific sensors, probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement parts in Section E,below. <br /> Yes* RFNo Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br /> Product; ❑Water. If yes,describe causes in Section E,below. <br /> Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports, if applicable <br /> F3' Yes ❑ No* Is all monitoring a ui mentoperational per manufacturer's specifications? <br /> * In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: ,S.n,r3/l .o/Mdn 7-' o-1,:9- /J �✓.. <br /> Page 2 of 3 03101 <br />