Laserfiche WebLink
0(Cont'd) PARTS DRAWING <br /> o not mix more compound than can be convenient- <br /> pouted within 15 minutes after adding the water. <br /> After the compound is mixed, slowly pour it into <br /> the sealing fitting to the required level. Make sure <br /> that the wires are well separated, so the compound <br /> completely surrounds them. Pour slowly to avoid <br /> trapping air bubbles in the compound. Immediately <br /> wine ally spilled compound from conduits and <br /> threads, and close the fitting with the closes-up plug. <br />' Make sure the plugs are tight. <br /> � <br /> OThe sealing compound• must dry for 24 hours at a PLUG "A" <br /> X30°F. rnininiurn ambient temperature in order to set <br /> properly. Do not activate the supplying circuit until <br />' the compound has dried completely. <br /> OPERATIONAL DATA <br /> In huntid atmospheres or wet locations, where it is <br /> likely that water could enter the interiors of <br /> enclosures or conduit runs, or where temperature <br /> and/or barometric changes can produce condensa- <br /> tion or moisture within the conduit system. <br /> raceways should be inclined so that water will not <br /> collect in seats. It is recommended that Killark <br /> EYD" draining seals be utilized to properly drain the <br /> PLUG "B" <br /> system. <br /> L <br />' MAINTENANCE DATA <br /> ENY Sealing Fittings require no special maintenance, NOTE: THE CLOSE-UP PLUGS <br /> other than a periodic inspection to be sure the close- MAY BE ORDERED SEPARATELY, <br />' up plugs are tight. In the event that a sealing fitting BUT, ARE INCLUDED WHEN <br /> would be subjected to damage, the damaged 'parts THE FITTING IS ORDERED. <br /> should be replaced immediately to insure the safety <br />' of the conduit system. Refer to the parts drawing at . <br /> the right for replacement parts. <br /> FITTING PLUG "A" PLUG "B" <br />' CAT. NO. CAT. NO. CAT. NO. <br /> MAINTENANCE MANAGER: Please tecotd the following ENY-1 CUPX-250 CUPX-2 <br /> informalicn for your records. <br /> ENY-2 CUPX-375 CUPX-2 <br /> COMPLETE <br /> CATALOG NO. ENY-3 CUPX-375 CUPX-3 <br /> IAs shown on package) ENY-4 CUPX- 1 CUPX-4 <br /> DATE;OF ENY-5 CUPX- 1 CUPX-5 <br /> INSTALLATION <br /> ENY-6 CUPX- 2 CUPX-6 <br />' P'N00901190 FORM NO. K0607 R1186 <br />