Laserfiche WebLink
OPW pillContai Series 61SOR Remote-Fill <br /> r Spill Container <br /> The OPW 61SOR is designed for <br /> two-point remote-fill applications,where • <br /> Trap Door OPW 634TT the fill'point IS not directly Over the UST. <br /> Cap The valve is installed in the tank through <br /> r- <br /> Fill Window I OPW 6347 a riser pipe directly over the tank. <br /> Adaptor A window in the drop tube is aligned <br /> with the entrance of the fill pipe from <br /> Riser Seal the remote-fill location to allow product • <br /> to flow into the drop tube and down <br /> through the valve.A riser seal prevents <br /> product from flowing into the tank from <br /> OPW FSA•00 outside the drop tube.A"trap door" <br /> OPW 61SOR Face Seal <br /> Overfill Adaptor assembly installed in the riser above <br /> Prevention the tank provides access for a gauging <br /> Valve OPW 61soR-4000 stick.Trap door, adaptor and cap are <br /> included with 61SOR. <br /> Drop tubes shall be cut at a 45° <br /> angle,with the top of cut no 61 SO Two-Point <br /> greater than 6"from the bottom of <br /> 6 the tank(Or per local regulations) <br /> The OPW 6150 Two-Point is used for <br /> two-point fill applications,tanks equipped <br /> F - I with separate product and vapor return <br /> " - connections.The OPW 61 SO replaces <br /> the standard fill drop tube in 4"fill riser <br /> pipes.The 61SOM models are specially <br /> designed for compatibility with M-85 and <br /> 61 SO Remote Fill M-100 methanol fuels and Ethanol (E85). <br /> Application <br /> -- --= 61SOC Coaxial <br /> The OPW 61SOC is used for coaxial <br /> 1.2100•EVR 63bTT Cap fill applications,tanks equipped with a <br /> Series Spill single productivapor return connection. <br /> Container r The 61SOC replaces the standard <br /> Coaxial fill drop tube in a 4"riser fill pipe. <br /> Vapor 633TC <br /> Return or 633TCP 61 SO-4BYT <br /> Path Adaptor <br /> Shipped without drop tubes, the <br /> 61SO-4BYT is designed to adapt to <br /> 61SOC existing coaxial and conventional drop <br /> 61SO.48YT or 61 SOP <br /> tubes that meet specific OPW standards. <br /> (The 61SOC-4BYT kit is required to <br /> adapt the 61 SO-4BYT for coaxial <br /> applications.) <br /> 61SOC 61 SOP <br /> Drop tubes shall be cut at a 45•angle.with the top of <br /> cut no greater than 6"From the bottom of the tank <br /> (Or per local regulations) <br /> 61SO.4000 Series Instruction Sheet Order Number.H1 1764M <br /> 61SOC Coaxial Fill Tube Instruction Sheet Order Number:Ca3634PA <br /> 61SOR Remote Fill Tube Instruction Sheet Order Number:H1 1964M <br /> R.''-ni7VER l L els PALJ T <br />