COMPLIANCE INFO 2006 - 2007 - Laserfiche WebLink

Home Browse Search

i 0 3. Piping Leak Detection Monitorin E uipment Monitorin Method Manufacturer Model Monitorin Fre uenc ® Sump leak sensors connected to • continuous monitoring system Specify type: VEEDER-ROOT 794380-323 Continuous ❑ Discriminating ® Non-discriminatin ❑ Mechanical line leak detectors with programmed leak threshold of three gallons per hour ® Electronic line leak detectors with programmed leak threshold of: VEEDER ROOT PLLD 848480-001 Every pumping cycle ❑ 0.1 qph ❑0.2 gph 03 gph ® Line integrity testing by: ❑ Electronic line leak detector is equipped to conduct line tightness El Annually ❑ Third party testing ❑ Other: ® Not required ❑ Other(Specify): 4. Dispenser Leak Detection Monitorin E ui ment Monitorin Method Manufacturer Model Monitoring Fre uenc ❑ Mechanical float in dispenser containment Continuous ® Electronic leak sensor in dispenser containment: ❑ Discriminating VEEDER-ROOT 794380-323 Continuous ® Non-discriminatin • ❑Visual inspection ❑ Daily ❑ No under-dispenser containment ❑ Other: ❑ Other(specify): 5. Positive Shutdown Capabilities ❑ S stem does not have positive shutdown ca abilities ® Individual dispenser shutdown will occur whenever release is sensed in under-dispenser containment ®Automatic pump shut off will occur whenever: ® Release is sensed in turbine sump ® Release is sensed in primary piping ® Release is sensed at dispenser ® Monitoring system is disconnected or fails in any way(fail safe) ❑ Other(specify): 6. Secondary Containment Testing ❑ Secondary containment is not tested ® In the State of California, secondary containment systems installed on or after January 1,2001, shall be tested upon installation, six months after installation, and every 36 months thereafter. Secondary containment systems installed prior to January 1, 2001, shall be tested by January 1,2003, and every 36 months thereafter. 7. Annual Equipment Certification/Testin LUAnnually • ❑Other(specify): Page 2 of 5