Laserfiche WebLink
• <br />SWRCB, January 2002 <br />• <br />9. FILL RISER CONTAINMENT SUMP TESTING <br />Facility is Not Equipped With Fill Riser Containment Sumps X <br />Fill Riser Containment Sumps are Present, but were Not Tested <br />Test Method Developed By: Sump Manufacturer Industry Standard <br />_1 Other (Specify) <br />Test ethod Used: n Pressure Vacuum <br />M <br />Other (Specify) <br />RECEIVED <br />FEa°a�a zoos' <br />1117,11-i-7 rCe10fi' <br />Professional Engineer <br />Hydrostatic <br />Test Equipment Used: FgLlihnlcnt Resolution: <br />Fill Sump # Fill Sump # Fill Sump # Fill Sump # <br />Sump Diameter_ <br />Sump De the <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />water and startin g test: <br />Test Start Time: <br />initial Reading (R,): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF-Ri): <br />Pass/Fail Threshold or Criteria: <br />Test Result: <br />Is there a sensor in the sump? <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />Was sensor removed for testin ? <br />Was sensor properly replaced and <br />verified functional after testing? <br />Comments — (include information on repairs made prior to testing, and recommended ollow-up for failed tests) <br />