Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 9. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sump Present,Tested X (See Comments Below!) <br /> Test Method Developed By: 0 Sump Manufacturer 0 Industry Standard Professional Engineer <br /> 0 Other(Spec) <br /> Test Method Used: 0 Pressure 0 Vacuum Hydrostatic <br /> 0 Other(Sped) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time: <br /> Initial Reading(R,): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Chane in Reading(R,-Ri): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: Pass 0 Fail Pass 0 Fail Pass 0 Fail 0 Pass 0 Fail <br /> Is there a sensor in the sump? Yes 0 No Yes 0 No Yes ❑No 0 Yes 0 No <br /> Does the sensor alarm when <br /> either product or water is Yes []No 0 NA Yes []No 0 NA Yes 0 No 0 NA 0 Yes 0 No 0 NA <br /> detected? <br /> Was sensor removed for testing? Yes 0 No 0 NA Yes 0 No 0 NA Yes ❑No 0 NA 0 Yes 0 No 0 NA <br /> Was sensor properly replaced and Yes 0 No 0 NA Yes 0 No 0 NA Yes 0 No 0 NA 0 Yes 0 No 0 NA <br /> verified functional after testin ? <br /> COM Ments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> Tank#6 Regular has a Combination Turbin/Fill Riser Containment Sump. <br /> Test results for Tank#6 Turbin/Fill Riser Containment Sump recorded on Piping Sump Page for Piping Sump#6. <br /> All other Tanks no equipped witb Fill Riser Containment Sumps. <br />