COMPLIANCE INFO 2010-2013 - Laserfiche WebLink

Home Browse Search

Appendix VI MONITORING SYSTEM CERTIFICATION For Use By All Jurisdictions Within the Stale of California Authority Cited:Chapter 6.7,Health and Safety Code; Chapter 16,Division 3,Title 23,California Code of Regulations This form must be used to document testing and servicing of monitoring equipment.A separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work.A copy of this form must be provided to the lank system owner/operator.The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: SJ TRANSIT Bldg.No.: Site Address: 1533 LINDSAY RD City: STOCKTON Zip: Facility Contact Person: DOUG Contact Phone No.: (209)4673571 Make/Model of Monitoring System: INCON TS 2001 Date of Testing/Servicing: 06-27-11 B. Inventory of Equipment Tested/Certified Check the appropriate boxes to Indicatespecific equipment ins ectad/serviced: Tank ID: DIESEL X4 Tank ID: 87 ® In-Tank Gauging Probe. Model: MAG ® IrtTank Gauging Probe. Model: MAG ® Annular Space or Vault Sensor. Model: LOW HIGH FLOAT ® Annular Space or Vault Sensor. Model: LOW HIGH FLOAT ® Piping Sump/Trench Sensors). Model: ULS ® Piping Sump/Trench Sensor(s). Model: ULS ❑ Fill Sump Sensor(s). Model: ® Fill Sump Sensor(s). Model: ULS ❑ Mechanical Line Leak Detector. Model: ❑ Mechanical Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: ❑ Electronic Une Leak Detector. Model: ❑ Tank Overfill/High-Level Sensor. Model: ❑ Tank Overfill/High-Level Sensor. Model: ❑ Other(specify equipment type and model in Section E on Page 2). ❑ Other(specify equipment type and model in Section E on Page 2). Tank ID: WASTE OIL/NEW OIL Tank ID: TRAINSFLUID ❑ In-Tank Gauging Probe. Model: ® In-Tank Gauging Probe, Model: MAG ® Annular Space or Vault Sensor. Model: ELS ® Annular Space or Vault Sensor. Model: LOW HIGH FLOAT ® Piping Sump/Trench Sensor(s). Model: ULS ® Piping Sump/Trench Sensor(s). Model: ULS ❑ Fill Sump Seasons). Model: ❑ Fill Sump Sensor(s). Model: ❑ Mechanical Line Leak Detector. Model: ❑ Mechanical Line Leak Detector. Model: ❑ Electronic Line Leak Detector. Model: ❑ Electronic Une Leak Detector. Model: ❑ Tank Overfill/High-Level Sensor. Model: ❑ Tank Overfill/High-Level Sensor. Model: ❑ Other(specify equipment type and model in Section E on Page 2). ❑ Other(specify equipment type and model in Section E on Page 2). Dispenser ID: 1.2 Dispenser ID: 33 ® Dispenser Containment Sensor(s). Model: ULS ® Dispenser Containment Sensor(s). Model: ULS ® Shear Valve(s). ® Shear Valve(s). ❑ Dispenser Containment Floats)and Chain(s). ❑ Dispenser Containment Float(s)and Chaints). Dispenser ID: 5-6 Dispenser ID: ® Dispenser Containment Sansone). Model: ULS ❑ Dispenser Containment Sensor(s). Model: ® Shear Valve(s). ❑ Shear Valve(s). ❑ Dispenser Containment Float(s)and Chaints). ❑ Dispenser Containment Float(s)and Chain(s). Dispenser ID: Dispenser ID: ❑Dispenser Containment ❑ Dispenser Containment Sensor(s). Model: Sensor(s). Model: ❑ Shear Valve(s). ❑Shear Valve(s). ❑ Dispenser Containment Plosits)and Chain(s). ❑Dispenser Containment Float(s)and Chain(s). 'If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility C.Certification-I certify that the equipment identified In this document was inspected/serviced in accordance with the manufacturers' guidelines.Attached to this Certification Is Information(e.g.manufacturers'checkllsts)necessary to verify that this Information is correct and a Plot Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports,I have also attached a copy of the report;(check all that apply): ❑System set-up ❑Alarm history report Technician Name(prin0: FELIX RAMIREZ Signature: Certification No.: 5273934-UT Dcense No: 08-1740 Testing Company Name: AFFORDA-TEST Phone No. (209)744-0113 Testing Company Address: 416 STREET GALT,CA 95632 Date of Testing/Servicing: 06.27-11 Monitoring System Certification Page 1 of 4 2121/07