Laserfiche WebLink
9 • <br /> Training Program <br /> All Veeder-Root contractors must successfully complete the applicable Veeder-Root <br /> training program before they can install, startup, and service TLS Console equipment. <br /> Contractors must have up-to-date Level 1 certification to install the TLS Console ISD <br /> system. Contractors must have an up-to-date Level 2, 3 or 4 certification and the ISD <br /> certification to startup and service the ISD system. The schedule, fee and registration <br /> information for the Authorized Service Contractor (ASC) training program can be found <br /> at htty1/www.veeder,com. <br /> To confirm TLS or ISD training a regulator should send an email to <br /> technicaltraining@ailbarco corn with the name (and company) of the ASC to obtain <br /> verification of the ASC TLS/ISD training status or call 800-997-7725 and press "" to get <br /> to the Veeder-Root menu and "*" again to speak to a representative. <br /> Maintenance <br /> The TLS console, including interface modules, do not require scheduled maintenance. <br /> ISD System Self-Test Monitoring algorithms are designed to verify proper selection, <br /> setup and operation of the TLS console and sensors. <br /> There is no recommended maintenance, inspection nor calibration for the Vapor Flow <br /> Meter or the Vapor Pressure Sensor. Servicing should be performed in <br /> response to warning or alarm conditions. <br /> Healy Phase 11 EVR System Including Veeder-Root ISD, Exhibit 2—VR-202-D <br />