Laserfiche WebLink
Section Miscellaneous Service Station Equipment <br /> Ball Shut-Off Valves <br /> Used in pressure systems, these valves are installed <br /> in the beginning of the pipeline system directly out- , <br /> S <br /> ide the submersible pump. They are designed to <br /> shut-off the piping line to isolate the tank and pump <br /> * from the pipeline for periodic tank and line testing. <br /> PART NO. i SIZE - <br /> j BSV-1515 I 1-1/2"x 1.12';Z41 BSV-2020 ! 2-X2- <br /> Double <br /> -x2"Double Tap Bushings <br /> Double tapped bushings are available in a variety of <br /> sizes to bush up or down to accommodate tank vent <br /> lines, fill lines, suction lines or other applications. <br /> Made of cast iron. <br /> SEAi <br /> PART NO. ! SIZE PART NO. : SIZE <br /> DTB-2015 2"x 1.12" DTB-4020 4"x 2" <br /> DTB-3020 3'x2" DTB-4030 4"x 3" <br /> DTB-4015 4"x 1.72— <br /> Section 27 Valves & Fittings Installer Tools <br /> Extractor Wrench <br /> A wrench used to remove and replace the extractor <br /> cage and the extractor test plug located inside the <br /> vapor line extractor fitting and the product line <br /> extractor fitting. <br /> PART NO. APPLICATION <br /> EWT-2000 For Removing Extractor Cage <br /> Adapter Wrenches <br /> There are two types of wrenches available for the instal- <br /> lation and removal of adapters. One wrench is used to <br /> install and remove all top seal adapters and side seal <br /> adapters frofn the steel fill pipe and the other is used to <br /> 1;nW install and remove vapor recovery adapters and coaxial <br /> Cfill adapters. The vapor recovery and coax fill adapter <br /> wrench is designed to be used in conjunction with the <br /> extractor wrench. <br /> PART NO, l APPLICATION <br /> AWT-9000 i AWT-1000 For Removing Vapor Recovery&Coax Adapters <br /> AWT.t000 <br /> AWT-3000 Top Seal&Side Seal Adaoters I <br /> 31 environ <br />