Laserfiche WebLink
UST SYSTEM PRiNTSET INFORMATION 0 0 <br /> 1. Four complete sets cf (To include specification sheets and/or equipment brochures if not an <br /> 2. "V Plans drawn to scale in -*a--erasable print. <br /> 3. \ Plot plan to show locz;io7 and number cf tanks. <br /> Tank crass-sectiorkl included on prints submitted. <br /> 5. Detail of tank, piping system, excavation and cover. <br /> 6. �_ Tank(s) and piping aaa-,-ved by a nationally recognized independent testing organization. [Title Z:, SL&hapter 16, <br /> Article 3, sec. 2631 (r) L 26351 <br /> 7. Verification of proaxt cxpatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or glues, etc. [Section 2635 (b) (2)] <br /> 8. A Manufacturer's written ins:allation instructions for tank(s), piping, monitoring devices, etc. 2635 (b) (5)) <br /> 9. Tightness Test (NFPA 3�:) is required on both primary (1 0) and secondary (20) containment systems tvfore covering. <br /> [Section 2635 (b) (6) 1 (7)1 <br /> 10. �' Double walled tanks ,sing p essure or vacu m testing to monitor the annular space. (Section 2635 (t) (7)] <br /> 11, NFPA 329 "Precision Test' required upon completion of installation with tank in operating condition. "est results to <br /> be submitted directly tc PS5/EHD from the testing company or owner of facility. [Health & Safety Cox, Division 20, <br /> Chapter 6.7, Section 25�5-1 <br /> 12. TANK COKPOSITICMI <br /> TANK # # f # # # # <br /> CAPACITY (r,Poo <br /> MANUFACTURER mv*Rg W <br /> COMPOSITION CLW <br /> MODEL <br /> PRODUCT 1�7 <br /> CORROSION PROTECTIONR-� <br /> U.L. LISTED <br /> COMPATIBILITY WITH 100% <br /> METHANOL <br /> 13. TANK(s) TO BE INSTALLED <br /> A. Stee[-clad with fiberglass reinforced plastic. <br /> V a. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)] <br /> C. Fiberglass (Sections 2635 (3) and 2631 (p)] <br /> (1) Striker plate dimensions and materials. <br /> (2) Striker plate under all accessible openings. <br /> v (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> Non-clad steel tank [Section 2635 (b)] <br /> (1) Cathodic protection provided for entire tank, piping and components (nuts, bolts, washers, <br /> etc.). <br /> (2) Approved by a corrosion engineer or N.A.C.E, technician. <br /> (3) Document stating inspection method and frequency (minimum semi-annual inspection requirement), <br /> 4 <br />