Laserfiche WebLink
UST SYSTEM PRINTSET INFORMATION <br /> 1. Four complete sets C` .:a#To includes specification sheets and u <br /> Pe !or eq pmen6 t brochures if not ai <br /> 2• �_ Plans drawn to scale ir, -.x.-erasable print. <br /> �• Plot pian to show la:s;ion and nunber of tanks. <br /> 4. Tank cross-sectional dies,-aro included on prints submitted. <br /> 5. Detail of tank, pipi,,$ system, excavation and cover. <br /> 6. �v Tank(s) and piping a=moved by a nationally recognized independent testing organization. [Title Z , S%sDchapter 16, <br /> Article 3, Sec. 2631 (r) S 26351 <br /> 7. verification of prodzt caa' tibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silic-ax glues, etc. [Section 2635 (b) (2)] <br /> 5. Manufacturer's written installation instructions for tank(s), piping, monitoring devices, etc. [Se-.t=an 2635 (b) (5)) <br /> 9. Tightness Test (NFPA 1:) is required on both primary (10) and secondary (20) containment systems afore covering. <br /> [Section 2635 (b) (6) d (7)1 <br /> 10. �' Double walled tanks tsins a-essure or vacuum testing to monitor the annular space. [Section 2635 (=) (7)] <br /> 19. NFPA 329 "Precision Test• required upon completion of installation with tank in operating condition. Test results to <br /> be submitted directly :o PtiS/EHD from the testing company or owner of facility. (Health $ Safety Coe, Division 20, <br /> Chapter 6.7, Section 252c9 (y)] � } <br /> 12. TANK C'CKPOSITIOW <br /> TANK # # f + # # # # <br /> CAPACITY ('71196,0 <br /> f <br /> MANUFACTURER mcvtOf}1.W <br /> COMPOSITION FJ— ci2�'I <br /> W <br /> MODEL <br /> PRODUCT L4 <br /> 1 <br /> CORROSION PROTECTION <br /> U.L. LISTED W--51; <br /> COMPATIBILITY uITH 100% � �� <br /> METHANOL <br /> 13. �7ANK(s) TO 8E INSTALLED <br /> A. Steel-clad with fiberglass reinforced plastic. <br /> B. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)] <br /> C. fiberglass (Sections 2635 (3) and 2631 (p)] <br /> _ (1) Striker plate dimensions and materials. <br /> (2) Striker plate under all accessible openings. <br /> v (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> �. D. Non-clad steel tank [Section 2635 (b)] <br /> (9) Cathodic Protection provided for entire tank, piping and components (nuts, baits, washers, <br /> etc.). <br /> (2) Approved by a corrosion engineer or N.A.C.E, technician_ <br /> (3) Document stating inspection method and frequency (minimum semi-annual inspection requirement)- <br /> 4 <br />