Laserfiche WebLink
�✓ _6. Overfill Protection System (spill catchment basin(s) required) <br />A. Nonmotor vehicle fuels (See Option IA) <br />1. Level sensing device and /2 or #'3 below <br />Audible/visual alarm triggered to liquid level sensor <br />Automatic shut-off device 04Y - <br />B. or vehicle fuels only <br />1, �nual monitoring <br />vCa. Written filling procedure provided( <br />Procedure addresses all of the following: <br />1) Visual monitoring of fuel level and filling operation <br />2) Available capacity of tank is at 103% or +200 gallons <br />(2635- 9) (A)(B)(C)) <br />3) Metered input <br />C. Spill catchment basin size <br />1. Minimum 5 gallons <br />XA O. Secondary containers (Includes leak interception and detection systems). <br />A. Backfill in secondary container -(:Article 3, Section 2635) <br />1. See Article 3 Section 2635(c) (1-8). <br />B. Two or more primary containers within secondary container (Demonstrate <br />product compatibilities). <br />C. Liquids detected in secondary containment must be sampled and analyzed for <br />hazardous substances. (Article 3, Section 2635(6) and Health and Safety <br />Code 25291(e)(h). <br />D. Water tight cover for secondary container excavation (Article 3, Section <br />2635(7)). <br />W/_11. Piping <br />A. Double containment required for:. <br />1. Product and vapor recovery lines. Uvt��cinrn� <br />2. Vent line (excluded only if ball float valve is installed). <br />