Laserfiche WebLink
0 0 <br /> 7 Software Overview <br /> Scripting Levels <br /> Once the eluent has been treated,the batch of effluent could <br /> be tested for pH. The Sample Rate will determine the amount of <br /> batches tested(10%,33%,50%, 100%). The up arrow key will increase <br /> the percentage and the down arrow will decrease the percentage. <br /> 111[oil 11 If III RE Vj 0011 <br /> 7 <br /> Not sufficient developer in Ikv Tank Select"Y"to force the <br /> Neutralizer to start new batch. <br /> ii <br /> When selecting"Y"all other functions are off. This will pro- <br /> vide a current pH reading of the solution in the cup the probe is sub- <br /> merged. The probe can be removed from the Neutralizer tank and put <br /> in buffer solution to verify the calibration of the pH probe. Once the <br /> reading has stabilizedpress the i I key to advance. <br /> If the pH is below 6.6 or above 7.4 press the ❑Q key to calibrate <br /> the probe. <br /> Press the"+"key to activate or the""key to deactivate the pH <br /> Alarm?When turned On,an alarm will ring if the pH is below 6 or <br /> above 10.Press the M key to advance to the next step. <br /> ® Jet Time ' <br /> This will determine the amount of secondsthe Enviro Jet will <br /> Jet the neutralized solution down the drain under pressure.Press"+" <br /> to increase and""to decrease the duration time.Press enter to return <br /> to the main menu. <br /> Page 14 Metafix pH Control Manual <br />