Laserfiche WebLink
Page 2 <br /> Sites as provided by the client are as follows: <br /> Location#3 the 924 printer sump. This is where the water based inks are used. <br /> Location#4 the Ringwood Starch Kitchen sump. This is where the corn starch mixture is <br /> made and stored. <br /> Location#6 the module facer sump where the starch is applied to the paper. The sump pit <br /> around it is for daily cleanup. <br /> Location#7 the holding tanks for the pre treated wastewater(this is the same material as <br /> the totes in the back so we will test a couple of these totes). <br /> Location#8 the Alar wastewater treatment is where we will pull the solids sample. <br /> Location#9 is the batch holding tank used before entering the sewer system (where we <br /> check the pH level. <br /> The total cost for sampling will be based solely on the hours of sampling and the time <br /> need to collect the samples. Sampling charge based on sampling hours between 0700-1500 will <br /> be billed at $150.00 per hour with a 2 hour minimum. Sampling charges based on after hours will <br /> be billed at $225.00 per hour with a 4 hour minimum. <br /> ♦ A Quality Assurance/Quality Control report is supplied with all of our analyses. This <br /> assures our valued clients of accurate and defensible data. <br /> ♦ All work undertaken is subject to our terms and conditions, which are outlined in our fee <br /> schedule and/or available upon request. <br /> If you have any questions relating to this quote,please do not hesitate to call us. <br /> Sincerely, <br /> Mike Ostrom <br /> Laboratory Manager <br /> FGL ENVIRONMENTAL <br />