Laserfiche WebLink
0 4 <br /> Plate Finisher 850S/US/C Page:aJs <br /> 4. First Aid Measures <br /> Eye Contact Check for and remove any contact lenses. In rase of contact, immediately flush eyes with <br /> plenty of water for at least 15 minutes. Get medical attention if symptoms occur. <br /> Skin Contact In case of contact, immediately flush skin with plenty of water for at least 15 minutes while <br /> removing contaminated clothing and shoes. Wash contaminated clothing before reusing. Get <br /> medical attention if symptoms occur. <br /> Inhalation Allow the victim to rest in a well-ventilated area. Get medical attention if symptoms occur. <br /> Ingestion Do not induce vomiting. Have conscious person drink several glasses of water or milk. Seek <br /> medical attention. <br /> 5. Fire Fighting Measures <br /> Flammability of the Non combustible. <br /> Product <br /> Hazardous thermal These products are carbon oxides(CO,CO:). <br /> (de)composition <br /> products <br /> Fire Hazards in Not available. <br /> Presence of Various <br /> Substances <br /> Explosion Hazards Not available. <br /> in Presence of <br /> Various Substances <br /> Fire Fighting Media Use DRY chemicals,CO2,water spray or foam. <br /> and Instructions <br /> Protective Clothing Be sure to use an approved/certified respirator or equivalent. <br /> (Fire) <br /> 6. Accidental Release Measures <br /> Small Spill and Leak Dilute with water and mop up,or absorb with an inert dry material and place in an appropriate <br /> waste disposal container. Finish cleaning by spreading water on the contaminated surface <br /> and dispose of according to local and regional authority requirements. <br /> Large Spill and Leak Absorb with an inert material and put the spilled material in an appropriate waste disposal. <br /> Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by <br /> spreading water on the contaminated surface and dispose of according to local and regional <br /> authority requirements. <br /> 7. Handling and Storage <br /> Handling Do not ingest. Avoid prolonged or repeated breathing of vapor. Avoid prolonged contact with <br /> eyes,skin,and clothing. Use with adequate ventilation. Wash thoroughly after handling. <br /> Storage Store at room temperature 25°C(77°F)or lower. Prevent from freezing <br /> 8. Exposure Controls, Personal Protection <br /> Engineering Ventilation is normally required when handling or using this product(typically 10 air changes <br /> Controls per hour). Ensure that eyewash stations and safety showers are close to the work-station <br /> location. <br /> Personal Protection <br /> Eyes Safety glasses. <br /> Body Synthetic apron. <br /> Respiratory Not applicable. <br /> Hands I mpervious gloves. <br /> Feet Not applicable. <br /> Continued on Next Page <br />