COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

(iii) returned to the process from which they are generated, without first being reclaimed. The material must be returned as a substitute for raw material feedstock, and the process must use raw materials as principle feedstocks. 261.3- Definition of Hazardous Waste (a) A solid waste, as defined in 261.2, is a hazardous waste if: (1) it is not excluded from regulation as a hazardous waste under 261.4 (b); and (2) it meets any of the following criteria (i) it exhibits any of the characteristics of hazardous waste identified in Subpart C (ii) it is listed in Subpart D and has not been excluded per 260.20 and 260.22 (iii) it is a mixture of a solid waste and a hazardous waste listed in Subpart D solely because it exhibits one or more characteristic, unless the mixture no longer exhibits that characteristic (iv) it is a mixture of solid waste and a hazardous waste listed in Subpart D and has not been excluded. 261.4- Exclusions 261.6- Requirements for Recyclable Materials (a) (1) Hazardous wastes that are recycled are subject to the requirements for generators, transporters and storage facilities of Paragraphs (b) and (c) of this section. Hazardous wastes that are recycled will be known as "recyclable materials". 261.7 - Residues of Hazardous Wastes in Empty Containers (b) (1) A container or inner liner removed from a container that has held any hazardous waste, except a waste that is a compressed gas or that is identified as an acute hazardous waste as defined in 261.31, 261.32 or 261.33 (e) of this chapter is empty if: (i) all wastes have been removed using practices commonly employed to remove materials from that type container and (ii) no more than 2.5 cm (1 inch) of residue remain on the bottom of the container or inner liner or (iii) (a) no more than 3% by weight of the total capacity of the container remains if the container is <= 110 gallons or