Laserfiche WebLink
�pNiECA, C'4! <br /> Manteca �A CITY OF MANTECA <br /> {�Q Z <br /> PUBLIC WORKS DEPARTMENT <br /> October 3, 1988 <br /> Indy Electronics, Inc. <br /> 400 Industrial Park Drive <br /> Manteca, California 95336 <br /> Attn: Mr. Gordon Butler <br /> Re: Industrial Waste Discharge Permit No. 88-1 <br /> During the City's inspection of Indy's new pretreatment facility <br /> certain requirements were discussed which I would like to document in <br /> writing since approvel of Discharge Permit 88-1 is contingent upon <br /> these requirements being met. The first requirement was that the epoxy <br /> coating to be applied to the concrete containment structure must be <br /> approved by the City and must be applied to the entire inside of the <br /> containment structure including underneath any tanks or legs of <br /> treatment equipment. When this requirement has been met, please call <br /> for inspection. <br /> The second requirement was that the effluent sampler, flaw meter and pH <br /> meter must be in place and operational prior to discharging into the <br /> City's sewer system. <br /> Please call for a final inspection prior to discharging into the City's <br /> sewer system. <br /> If you have any questions please call me at (209)239-8462. <br /> Sincerq�Y. <br /> PODESTA <br /> puty Director of Public Works <br /> JP:lh <br /> cc: Michael Brinton, Director of Public Works <br /> Louis Gonzales, Indy Electronics <br /> Attachments <br /> 1001 W. CENTER ST. • MANTECA, CA 95336 • (209) 239-8460 <br />