Laserfiche WebLink
F. In-Tank Gauging 1 SIR Equipment: ® Check this box if tank gauging is used only for inventory control. <br /> ❑ Check this box if no tank gauging or SIR equipment is installed. <br /> This section must be completed if in-tank gauging equipment is used to perform leak detection monitoring. <br /> Complete the following checklist: <br /> [IMentry Has all input wiring been inspected for proper entry and termination,including testing for ground faults?Were all tank gauging probes visually inspectetl for damage and residue buildup?Was accuracy of system product level readings tested? 2'Was accuracy of system water level readings tested? w\` Were all probes reinstalled properly? M' Were all items on the equipment manufacturer's maintenance checklist completed? t [)EpD' <br /> `In Section H,below,describe how and when these deficiencies were or will be corrected. <br /> Line Leak Detectors(LLD): ❑ Check this box if LLDs are not installed. <br /> Com Tete the followin checklist: <br /> ® Yes ❑ No* For Simulated <br /> leak rate: ®3r annual equipment <br /> er ffiicationn,hwas a leak simulated to verify LLD performance? (Check all that apply) <br /> ❑ N/A <br /> ® Yes [3 No` Were all LLDs confirmed operational and accurate within regulatory requirements? <br /> ® Yes ❑ NOW Was the testing apparatus properly calibrated? <br /> ® Yes ❑ No` For mechanical LLDs,does the LLD restrict product flow if it detects a leak? <br /> ❑ N/A <br /> ❑ Yes ❑ No` For electronic LLDs,does the turbine automatically shut off if the LLD detects a leak? <br /> ® N/A <br /> ❑ Yes ❑ No` For electronic LLDs,does the turbine automatically shut off if any portion of the monitoring system is disabled or disconnected? <br /> ® N/A <br /> ❑ Yes ❑ No' For electronic LLDs,does the turbine automatically shut off if any portion of the monitoring system malfunctions or fails a test? <br /> ® N/A <br /> ❑ Yes ❑ No` For electronic LLDs,have all accessible wiring wnnections been visually inspected? <br /> ® N/A <br /> ® Yes ❑ No` Were all items on the equipment manufacture s maintenance checklist wmpleted7 <br /> In Section H,below,describe how and when these oenciencies were or will be corrected. <br /> H. Comments: — <br /> Monitoring System Certification <br /> Page 3 of 4 2/21/07 <br />