Laserfiche WebLink
r <br /> (d) Firing type, (e.g. , tangential, opposed, front) . <br /> (e) Type of fuels and the percentage of combustion air. <br /> N/A (ii) Describe all fuels used; indicate the types, grades, <br /> consumption rates; pretreatment of the fuel if any <br /> (method and temperature) ; heating value (e.g. , BTU/cu. <br /> ft. , BTU/gal. , BTU/lb. ) ; and ash, sulfur; moisture, H2S, <br /> and nitrogen contents, where applicable. <br /> (a) For oil preheaters, indicate- the type and the <br /> temperature to which the oil is expected to be <br /> preheated. <br /> (b) State whether unit is to be used to incinerate <br /> waste gas or liquid stream. Submit a drawing <br /> of the method of waste stream introduction with <br /> respect to gas/fuel oil burners. <br /> (c) 1) Indicate the amount of each fuel used per year <br /> (gal/yr. for liquid, million cu. ft./hr. for <br /> gaseous, and tons/yr. for •solid; also indicate <br /> fuels- used as standby fuel) . <br /> 2) Indicate the maximum consumption rate of fuel in <br /> any one hour and any 24--hour period. <br /> (iii) For combustion facilities, specify the heat input <br /> rate or the thermal efficiency. <br /> Section E. OTHER PERMITS OR APPROVALS <br /> List all permits, permissions or approvals required from public <br /> agencies for this development and indicate those applied for or <br /> granted. <br /> BUILDING PERMITS <br /> 24/105 .: 02 /12/ <br />