Laserfiche WebLink
3001400 HYDROSORB®R <br /> Ciim-Tek SPIN-ON FILTERS <br /> Filtration, dw <br /> APPLICATION <br /> +300/400 1IYDf10SORB'I Spin-on Filters are designed for service station pumps and dispensers. HYDROSORB"I spin- <br /> on filters are designed to remove free water, emulsified water, and particulates from diesel fuels, gasoline, and fuel oils. <br /> •300/400 IIYDROSOR8'11 Spin-on Filters are specially designed to pass allowable amounts of water entrained in certain <br /> diesel fuels and gasolines such as MTBE blends. Nefer to the "'Filtration Technology for Fuels" for specific information <br /> regarding differences between I IYDROSORS"�i and HYDROSORB"' 11. <br /> •300/400 1 IYDROS0178'1 and If Spin on Filters are compatible with gasoline-alcohol blends of 10%or less, but will not <br /> remove water. Phase separation will not be detected it it occurs. <br /> •30014001IYDROSORB'1 and If Spin on Filters are not to be used with aviation fuels, methanol,or methanol blended fuels. <br /> FEATURES <br /> -The maximum flow is 15 gpm/561pm. The maximum working pressure <br /> is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/1.7 bar. <br /> -The HYDROSORB'300 Series Spin-on Filters have a standard 3/4" <br /> opening required for most service station pumps and dispensers. <br /> ''.•I +h ` trf 'y •T he 3001 IS-10 T ype 1 or Type 2,a nominal 10 micron,is recommended <br /> for gasoline and diesel fuels. <br /> •T he 30011 S 30 Type 1 or Type 2,a nominal 30 micron,maybe preferred <br /> for heavier dislilliles such as diesel fuel and fuel oils, <br /> •f he water holding capacity for the 3001 IS-10 Type 1 and Type 2 and the <br /> 3001 IS 30 Type 1 and T ype 2 is 130 milliliters or 4.5 ounces before flow <br /> SLS restriction occurs. <br /> bnM. IN •T he 3001 IYDROSORB"Spin-on Filters are recognized by Underwriters <br /> � M• <br /> wrr�s�wr .�. :- , Laboratories for use on service station pumps and dispensers. <br /> -The 300 HYDROSORB"Spin-on Filters are available with a selection of <br /> aluminum and cast-iron fifler adaptors for standard applications. <br /> FEATURES <br /> -The maximum flow is 25 gpm/93.75 Ipm. The maximum working <br /> pressure is 50 psi/3.4 bar. The maximum differential pressure is 25 psi/ <br /> } 1.7 bar. <br /> t <br /> -The 400 HYDROSORS'Spin-on Filters havea high-capacity 1"opening <br /> required for newer model service station pumps and Gilbarco Advantage <br /> Series dispensers. <br /> -The 4001 IS-10 Type 1 or Type 2,a nominal 10 micron,is recommended <br /> v for gasoline and diesel fuels. <br /> ( � ;1 -The 4001 IS-30 Type 1 or Type 2,a nominal 30 micron,may be preferred <br /> '} for heavier distillates such as diesel fuel and fuel oils. <br /> f , -The water-holding capacity for the 400HS-10 Type 1 and Type 2 and the <br /> 400HS-30 Type 1 and Type 2 is 130 milliliters or 4.5 ounces before flow <br /> restriction occurs. <br /> -The400 HYDROSORR"Spin-on Filters are recognized by Underwriters <br /> Laboratories for use on service station pumps and high-speed dispensers. <br /> Vir , <br />