Laserfiche WebLink
Pressurized Line Leak Detection Tests (PLLD Option) <br /> You can run a PLLD test on all lines or on a single line_ This step lets you select 3.0, 0.2, or 0.1 gph line leak tests to run on <br /> TO START A PLLD TEST the selected lines). If your system does not have 0.2 or 0.1 gph test <br /> In the ©paroling mode, press Quntil the display shows: options, you will not see these selections. <br /> START LINE PRESSURE TEST <br /> To select 3.0 gph test, press ©. Press Q to select 0.2 or 0.1 gph <br /> PRESS<STEP>TO CONTINUE tests, then press © . To select the 3.0 gph test, press Q. The <br /> displays shows: <br /> Press a and the display shows: 10 GPH <br /> SELECT LINE <br /> PRESS<STEP>TO CONTINUE. <br /> ALL LINES <br /> ."' To run the selected fest, press ©. The system displays the <br /> Press Q to accept all lines. To select a single line, press (9 until message (in this example for all.lines): <br /> you see the line you want, then press G and G). The display START LINE TEST:ALL LINE <br /> below appears: PRESS<ENTER> <br /> SELECT TEST TYPET <br /> 3.0 GPH <br /> KEY SYMBOLS, (Q Backup D Change®Enter Q can pan©Mode(a pnnf Q Step O Tank/S_ <br />