Laserfiche WebLink
r 16. p1,�A Tanks subject to floQ&. [Section 2635 (a) Ml <br /> A. Anchored by deadman or slab. <br /> _ B. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. <br /> D. Calculations provided. <br /> 1-l. SPILL AND OVERFILL PREVENTION <br /> _ Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spi <br /> containers)/piping sump(s) required, including tank fill and all openings). <br /> X A. Spill container [Section 2635 (b) (1)]. <br /> If made of metal, exterior wall protected from galvanic corrosion. <br /> Capacity: (minimum of five gallons) <br /> Equipped with a drain valve which allows drainage of spill into primary container. <br /> _ Manufacturer: O P W Ic —a-100 <br /> XOverfill prevention system does not allow for manual override and meets one of the following requirement <br /> (1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audib <br /> and visual alarm [Section 2635(b)(2)(A)] . <br /> Manufacturer: Model: <br /> _ (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more tha <br /> 95% capacity and activates an audible alarm at Least five minutes before overfill [Section 2635 <br /> (b) (2) (B)]. - <br /> Manufactuner• Model: <br /> (3) Provide positive shut off at no more than 95% capacity [Section 2635 (b) (2) (C)]. <br /> Manufacturer: OPLJ Model: (o 1 SQ —�IOG . <br /> _ (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br /> exposed to the product overfilling [Section 2635 (b) (2) Oil. <br /> Manufacturer: Model: <br /> 18. PIPING INFORMATION <br /> PIPING INFORMATION TANK# TANK# TANK# TANK# <br /> DISTANCE from 8,5- n D <br /> DISPENSER to TANK O �O <br /> MANUFACTURER <br /> SYSTEM TYPE <br /> CONSTRUCTION <br /> MATERIAL `, <br /> LEAK DETECTION SYSTEM V teE G <br /> 100% METHANOL COMPATIBILITY X YES NO <br /> CORROSION PROTECTION YES NO <br /> System Type; suction, pressure, and gravity <br /> Construction: single-walLed, double-walled, tined-trench, etc. <br /> �* Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br /> 7 <br />