Laserfiche WebLink
TSP - K4A TANK SENTINEL° <br /> PROBE INSTALLATION KIT <br /> DESCRIPTION <br /> The TSP-K4A Probe Installation Kit is used to install <br /> TSP-LL liquid level probes in underground tank <br /> applications. It is designed to allow the probe to be AEMM <br /> suspended in a 4 inch riserpipe. This method of installation IL qW <br /> guarantees that the probe can provide accurate level <br /> . .� .. <br /> information and that the tank is sealed in accordance with <br /> It also provides excellent <br /> regulatory requirements. =-- <br /> protection for the probe. The TSP-K4A installation kit <br /> makes it easy to install TSP-LL liquid level probes properly <br /> and safely. �� <br /> The TSP-K4A installation kit actually suspends the level <br /> sensor from the top of the riser. The kit is designed so that <br /> the probe and cable do not twist during installation and so <br /> the cable is sealed and stain relieved. It also allows easy <br /> access to the probe forinspection,ifrequired.TheTSP-K4A <br /> Installation kit allows you to install level probes in almost <br /> any underground tank. It works equally well in fiberglass <br /> and steel tanks,and can be adjusted to accommodate tanks <br /> buried at almost any depth. <br /> INSTALLATION PROCEDURE o 0 <br /> Using the TSP-K4A installation kit, you can install a <br /> TSP-LL liquid level probe in minutes. You start the o 0 <br /> installationprocedure bymaking some quick measurements <br /> and screwing the installation kit coupling to the riser pipe. <br /> Next you cut the suspension chain to the approximate <br /> length required. The chain is then attached to the TSP-LL i <br /> probe with the split ring included with the kit. The probe <br /> is lowered into the riser and suspended from the support 7 <br /> plate,eye-bolt,and wing-nut until the probe is 0.25'from p'p <br /> the bottom of the tank. Finally,it is a simple matter to run 7 <br /> the probe cable through the seal fitting provided,and then <br /> snap the 4 inch pipe plug cover on top of the assembly. <br /> ORDER PART NUMBER: TSP-K4A h ti <br /> Distributed by: <br /> WCONI <br /> INTELLIGENT CONTROLS.INC. <br /> P.O. Box 638 • Saco, ME 04072 USA <br /> 800-833-8328 1 207-283-0156 <br /> 000-1228 RevC Fax: 207-283-0158 <br />