Laserfiche WebLink
The Large Mouth series dispenser <br /> sump's modular design provides versatility <br /> and ease of installation. <br /> There are six polyethylene bases in <br /> three lengths and two depths. These bases "Large Mouth'f <br /> have a large 22"wide by 24",36"or 48" <br /> long openings,easing the installation of Series <br /> e s <br /> entry boots and piping connections.The /( ►J <br /> ribbed riser can be cut down in the field to LM <br /> achieve proper pipe slopes with respect to <br /> grade. The bases can also fo Fiberglass Dispenser Sump <br /> Encapsulated(-FE series) for high water or <br /> other harsh environments. <br /> A variety of Large Mouth Tops (LMT's) <br /> are available to match nearly every <br /> dispenser model.The tops are corrosion <br /> resistant,painted steel lids to which shear <br /> valves and dispenser frames are mounted. <br /> Design Highlights t Advantages <br /> ■ 22"wide by 24",36"or 48"long opening <br /> on base gives plenty of room for boot, <br /> fitting and monitor installation. <br /> ■ Available in medium and deep burial <br /> depths to properly maintain slope. <br /> • Fiberglass Encapsulated versions for <br /> high water table and other harsh envi- <br /> ronments. <br /> ■ The base widens to a spacious 26" <br /> where entry boots and pipe connections <br /> are made. <br /> • Height modifications are accomplished <br /> by trimming the base at the ribs. <br /> • A variety of different lids match almost <br /> every dispenser model. <br /> • Stabilizer Bar Kits(SBK's)mount into <br /> welded stmt channels for shear valve <br /> mounting. One SBK is required for each <br /> shear valve and is purchased seperately. <br /> Advanced Polymer <br /> Technology, Inc. <br /> (800) 262-9899 <br />