Laserfiche WebLink
• s <br /> Inspection, handling and storage <br /> 3 Inspection <br /> 3 Handling and storage <br /> Materials requirements <br /> 3 Pipe <br /> 3 Adhesive <br /> Field cutting and tapering <br /> 4 Cutting <br /> 4 Tapering <br /> 4 Taper Maker <br /> Bell and spigot joining system <br /> 6 Joint preparation <br /> 6 Mixing the adhesive <br /> 6 Applying the adhesive <br /> 7 Making(stabbing)the joint <br /> 7 Curing the adhesive <br /> 8 Using the Chem Cure Pak <br /> 8 Using the heating blanket <br /> • 9 Insulating the joint <br /> NPT threaded connections <br /> 10 Thread preparation <br /> 10 Making the joint <br /> Pipe installation <br /> 10 Bedding, backfilling and covering <br /> 10 Burial depth <br /> 11 Trench width <br /> 11 Pipe protection <br /> 11 Supporting valves and accessories <br /> 11 Connecting to fittings <br /> 12 Precise alignment and make-up <br /> 12 Pipe testing <br /> Repairs <br /> 13 Extensive damage <br /> 13 Minor damage <br /> Typical installations <br /> 14 Dualoy 300011-product/vapor recovery system <br /> 2 <br />