COMPLIANCE INFO 2000-2005 - Laserfiche WebLink

Home Browse Search

�s�NKNOLO_�✓� MONITORING SYSTEM CERTIFICATION se By All Jurisdictions Within the State of Calif Authority Cited:Chapter 6.7, h and Safety Code;Chapter 16,Division 3 Title 23, omia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility,a separate certi ication or report must be Prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The ownerloperator must submit a copy of this forth to the local agency regulating UST systems within 30 days of test date. A.General Information City: MANTECA CA Zip:95336 Facility Name: ULTRAMAR 492 Site Address: 470 N MAIN ST Contact Phone No:g23-1344 Date of Testing/Service: 12102/2003 Facility Contact Person: MANAGER Make/Model of Monitoring System: GBCO EMC Work Order Number: 2229244 B.Inventory of Equipment Tested/Certified Check the appropriate boxes to indicate specific equipment inspected/serviced r NLEADED Tank ID: SUPREME Gauging Probe. Model: MAG X In-Tank Gauging Probe. Model: MAG Space or Vault Sensor. Model: 420 Annular Space or Vault Sensor. Model: 420 umpfTrench Sensor(s). Model: 208 Piping SumprTrench Sensor(.). Model: 208 p Sensor(s). Model: Fill Sump Sensor(s). Model: ical Line Leak Detector. Model: FX1V Mechanical Line Leak Detector. Model: FX1V nic Line Leak Detector. Model: Electronic Line Leak Detector. Model: verfill/High-Level Sensor. Model: X Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). TanklTank lD: In-Tank Gauging Probe. Model: In-Tank Gauging Probe. Model: Annular Space or Vault Sensor. Model: Annular Space or Vault Sensor. Model: Piping SumpfTrench Sensor(s). Model: Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(.). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank OverfiIl/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other(specify equipment type and model in Section E on page 2). Other(specify equipment type and model in Section E on page 2). Iispenser 1/2 Dispenser ID: 7/8 Dispenser Containment Sensor(s) Model: Dispenser Containment Sensors) Model: QX Shear Valve(s). X Shear Valves) QX Dispenser Containment Float(.)and Chain(.). X Dispenser Containment Float(.)and Chain(.). Dispenser ID: 3/4 Dispenser ID: Dispenser Containment Sensor(s) Model: Dispenser Containment Sensor(s). Model: Shear Valve(s). X1 Shear Valve(s). X Dispenser Containment Float(.)and Chain(.). Dispenser Containment Float(s)and Chain(s). Dispenser ID: 5/6 Dispenser ID: 0 Dispenser Containment Sensor(.) Model: Dispenser Containment Sensor(s). Model: Shear Valve(s). Shear Valve(s). ❑X Dispenser C.ntainment Float(.)and Chain(s). Dispenser Containment Float(s)and Chain(s). If the facility contains more tanks or dispensers,copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers'guidelines. Attached to this certification is information(e.g manufacturers'checklists)necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment.For any equipment capable of generating such reports, I have also attached a copy of the(Check all that apply): System set-up report; ❑ Alarm history report X❑ PRINTED NAME: KEVIN MATLOCK SIGNATURE: COMPANY: Tanknology PHONE NO: (800)800-4633 page 1 of 3 Based on CA form dated 03101