Laserfiche WebLink
03/14/2016 09: 36 9163712540 BZ MAiNT PAGE 02106 <br /> a Results of TestinglServicing APR 06 2l7i6 <br /> software Version Installed: 329.01 <br /> Complete the followin checklist: <br /> ® Yes ❑ No* is the audible alartrr operational'? <br /> ® Yes ❑ No* is the visual alarm operational? <br /> Oyes ❑ No* Were all sensors visually inspected, functionally tested,and confirmed operational? <br /> 0 Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> N Yes ❑ No* if alarms are relayed to a remote monitoring station, is all communications equipment (e.g., modem) <br /> ❑ NIA operational? <br /> 0 Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ NIA rnvnitoring system detects a leak, fails to operate, or is electrically disconnected? if yes. which sensors initiate <br /> positive shut-down? (Check all that apply) NSump/Trench Sensors; ® Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? N Yes; ❑No. <br /> N Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e., no <br /> ❑ N/A mechanical overfill prevention valve: is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s)and operating roperly? if so,at what percent of tank capacity does the alarm trigger? 90% <br /> F1Yes* N No Was any monitoring equipment replaced? if yes, identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement paM in Section F,below, <br /> aWas liquid found inside any secondary containment systems designed as dry systems? (Check❑ll that apply) <br /> ❑ Product; ❑ Water, if yes, describe causes in Section F,below. <br /> Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports, if applicable <br /> is all monitoring equipment aperational per manufacturer's specifications? <br /> *IR Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments; <br /> Monitoring Certification Test ReTort 2 of-4 <br />