Laserfiche WebLink
SWRCB,January 2002 Page 1 of 1 <br /> 7.UNDER-DISPENSER CONTAINMENT C TESTING <br /> est Method Developed By: UDC Manufacturer W Industry Standard r Professional Engineer <br /> r Other(specify) <br /> Test Method Used By: r Pressure r vacuum r Hydrostatic <br /> r Other(Specify) <br /> Test Equipment Used: VPLT F, ui ment Resolution:0.00001 in. <br /> UDC#1/2 UDC#3/4 UDC# UDC# <br /> UDC Manufacturer: environ environ <br /> UDC Material: _ <br /> UDC Depth: 28.00 28.00 <br /> Height from UDC Bottom to Top 900 9.00 <br /> of Highest Piping Penetration: <br /> Height from UDC Bottom to 100 100 SEP 2 2015 <br /> Lowest Electrical Penetration: <br /> Condition of UDC prior to good good EN IRONMENTA <br /> testin : <br /> Portion of UDC Tested' 11 11 <br /> Does turbine shut down when <br /> UDC sensor detects liquid(both a Yes r Nor NA is Yes r No(NA r Yes r Nor NA r Yes r Nor NA <br /> product and water)?* <br /> Turbine shutdown response time 02:00:00 sec 02:00:00 sec sec sec <br /> Is system programmed for fail- r,: Yes r Nor NA r► Yes r Nor NA r Yes r NorNA r Yes r Nor NA <br /> safe shutdown?* <br /> Was fail-safe verified to be re Yes r Nor NA 9 Yes r NorNA r Yes r Nor NA r Yes f Nor NA <br /> operational?* <br /> Wait time between applying <br /> pressure/vacuum/water and 5 min 5 min min min <br /> starting test <br /> Test Start Time: 09:35:00 10:15:00 <br /> Initial Reading(R)): 0.00000 in. 0.00000 in. <br /> Test End Time: 09:50:00 10:30:00 <br /> Final Reading(RF): 0.00050 in. -0.00010 in. <br /> Test Duration: 15 min 15 min <br /> Change in Reading(RF-RI): 0.00050 in. -0.00010 in. <br /> Pass/Fail Threshold or Criteria: +/-0.00200 +/-0.00200 +/- +/- <br /> Test Result: Pass Pass <br /> Was sensor removed for testing? IT Yes r Nor NA r Yes r Nor NA r Yes r Nor NA r Yes r Nor NA <br /> Was sensor properly replaced and G yes r Nor NA r Yes r Nor NA r Yes r Nor NA r Yes r Nor NA <br /> verified functional after testing? <br /> COmmeStS—(include information on repairs made prior to testing, and recommended follow-up for jailed tests) <br /> If the entire depth of the UDC is not tested,specify how much was tested.If the answer to any of the questions indicated with m asterisk(•)is"NO"or"NA",the entire UDC must <br /> be tested. <br /> WO:2324076 <br />