INSTALL_2013 - Laserfiche WebLink

Home Browse Search

TANK SUMP GUIDE SPECIFICATIONS Part l:General 6. If hydrostatically monitored,any solution used in the monitoring 1.01 Quality Assurance space shall be compatible with the sump and be of a contrasting A. Acceptable Manufacturers: color to the sump. Containment Solutions,Inc.,Conroe,Texas E. Hydrostatic Monitoring Fluid B. Governing Standard: 1. Brine monitoring fluid shall be a calcium chloride solution 1. Tank sumps shall bear the UL Listing mark (same as tank). 1.02 Submittals 2. Propylene Glycol Contractor shall submit copies of:shop drawings,manufacturer's F Secondary Containment Collar product brochures and installation instructions. 1. UL label shall be affixed to collar. Part 11:Products 2. The collar shall be fiberglass reinforced plastic,42"or 48"in 2.01 Single-Wall or Double-Wall Fiberglass Tank Sump diameter and shall be factory-installed in accordance with drawings. A. Product Compatibility Requirements 3. The collar shall include an internal adhesive channel. 1. Tank sumps shall be compatible with the same products as the 4. The collar shall be included in the 30-year tank warranty. fiberglass underground storage tank: G. Adhesive Kit(Kit AD) a. Diesel fuel oils for oil burning equipment 1. UL Listed and alcohol compatible adhesive kit shall provide a kerosene, dies b. Gasoline,jet fuel,aviation gasoline,motor oil(new or used), watertight seal at the tank sump and containment collarjoint kerosene,diesel motor fuel. to prevent the ingress of water or egress of fuel.The adhesive C. Alcohol-gasoline blend motor fuels: kit includes resin,catalyst,mixing stick,putty knife,sandpaper, • Gasoline-ethanol blends with up to 100%ethanol. grout bag,and installation instructions. • Gasoline-methanol blends with up to 100%methanol. H. Tank Sumps d. Oxygenated motor fuels at ambient temperatures with up 1. UL label shall be affixed to tank sump components. to 20%(by volume)methyl tertiary butyl ether(MTBE),ethyl 2. Tank sumps&collars shall be listed by Underwriters Laboratories tertiary butyl ether(ETRE),di-isopropyl ether(DI PE),tertiary for petroleum fuels and all blends of alcohol(same as tank). butyl alcohol(TBA),tertiary amyl methyl ether(TAME),or Collar and sump shall be tested and listed as a complete sump tertiary amyl ethyl ether(TAEE). system. e. Biodiesel-diesel blends with up to 100%biodiesel 3. Tank sump components shall be constructed of fiberglass (B100 per ASTM). reinforced plastic.The tank sump shall be 42"or 48"in diameter B. Materials and must mount to the secondary containment collar.Standard 1. The tank sump shall be manufactured with premium resin and tank sump shall consist of an octagon shaped base(round base glass fibers. is optional),round body extension and enclosure top. The octagon base shall be 24"in height and provide 19"high C. Dimensional Requirements(refer to Containment Solutions literature) 4. panels for piping entry points.The base must be capable of 1. Tank sump diameter shall be_(42"or 48"). joining to the collar with an internal adhesive channel. 2. Tank sump overall height shall be_(3,4,5,6,7). 5. A34"O.D.watertight lid shall be provided at the submersible and D. Monitoring Capabilities fill/vapor end of the tank and provide a watertight seal to the 1. Double-wall tank sumps shall have a monitoring space between sump enclosure withl 2"of water above the lid and remain leak the walls to allow for the free flow and containment of leaked free. product from the primary tank.The monitoring space shall 6. Tank sumps are designed for operation at atmospheric pressure provide equal communication in all directions. and must be vented. 2. The following continuous monitoring conditions shall be 7. Refer to tank sump drawings for standard models and compatible with the cavity between the inner and outer wall: configurations. a. Vented to atmosphere Part ill:Execution b. Continuous Hydrostatic Pressure 3.01 Installation and Testing c Continuous Vacuum-5 psig maximum(1 0.2"Hg). Fiberglass underground tank sumps must be tested and installed according 3. Tank sumps shall have an integrally mounted annular space to the current installation instructions provided with the sump(refer to reservoir constructed of fiberglass reinforced plastic materials Containment Solutions Pub.No.INST 6030 and 6034). and be included in the sump warranty. Part IV:Limited Warranty 4. The monitoring fitting shall be a 1-1/2"FRP threaded fitting. 4.01 Limited Warranty 5. The leak detection performance of the monitoring system shall Warranty shall be Containment Solutions limited warranty in effect attime of be tested and verified by a qualified independent consultant to delivery. detect leaks in the primary or secondary walls as small as 0.005 gallons per hourwithin 4.6 days. CONTAINMENT SOLUTIONS 5150 Jefferson Chemical Road•Conroe,TX 77301-6834 Toll Free:877-CSI-TANK•Phone:936-756-7731•Fax 936-756-7766 www.containmentsolutions.com O ®2009•Containment Solutions,Inc.•All Rights Reserved•The Containment Solutions logo is a trademar of Containment Sdutions,Inc. WP/1 MI1 Mg.Pub.No.ACC 5025