Laserfiche WebLink
! •Monitoring System Certification • <br /> D. Results]]of Testing/Servicing <br /> Software Velon Installed: 8.02 <br /> Cam lete the follow n2 checklist: <br /> (x)Yes ❑ No* Is the audible alarm operational? <br /> x Yes No* Is the visual alarm o erational? <br /> x Yes No* Were all sensors visual] inspected,functional] tested,and confirmed operational? <br /> (x)Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ( )Yes ( No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br /> (x) N/A operational? <br /> rYeO No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ( )N/A monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate <br /> positive shut-down? (Check all that apply) ❑O Sump/Trench Sensors; 0 Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ®Yes; ❑No. <br /> () No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br /> N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill oint(s and o eratin ro erl ? If so,at what ercent of tank ca aci does the alarm tri er? % <br /> (x) No Was any monitoring equipment replaced? If yes, identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all re lacement arts in Section E,below. <br /> (')NoWas liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) ❑ <br /> Product; ❑Water. If es,describe causes in Section E,below. <br /> No* Was monitorin s stem setu reviewed to ensure ro er settin s?Attach set u re orts,if a licable <br /> No* Is all monitoring a ui mentoperational per manufacturer's specifications? <br /> * In Section'E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: - <br /> Page 2 of 4 03/01 <br />