COMPLIANCE INFO_2016 - PRESENT - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of 9. FILL. RISER CONTAINMENT SUMP TESTING F� 9017 Facility is Not Equipped With Fill Riser Containment Sums C Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic 'I Other (Specify) Test Equipment Used: Caldwell Level Change Indicator Fill Sump #1-91 Fill Sum #2-87 Sum Diameter: 42" 42" Equipment Resolution: .002 Fill Sump # Fill Sump # Sum De the 47" 50 %d' Height from Tank Top to Top of Hi hest Pi in Penetration: 14" 13 %" Height from Tank Top to Lowest Electrical Penetration: 21" 20 %:" Condition of sump prior to testing: Dry Dry Portion of Sump Tested Water Level 23" Water Level 22 VT Sump Material: Fiberglass Fiberglass Wait time between applying water and starting test: 5 Minutes 5 Minutes Test Start Time: 8:47 8:52 Initial Reading (R,): .001 .001 Test End Time: 9:17 9:22 Final Reading (RF): .001 .001 Test Duration: 30 Minutes 30 Minutes Change in Reading RF -R,: 0 0 Pass/Fail Threshold or Criteria: .005/30Minutes .005/30Minutes Test Result: Pass Pass Is there a sensor in the sump? Yes Yes Does the sensor alarm when either product or water is detected? Yes Yes Was sensor removed for testing? Yes Yes Was sensor properly replaced and verified functional after testing? Yes Yes Comments — (include information on repairs made prior to testing and recommended follow-up for failed tests) Fill Riser Sump #1 is for Tank #2 Premium Unleaded. Fill Riser Sump #2 is for Tank #3 Regular Unleaded. Tank #1 Diesel, not equipped with Fill Riser Sump!