Laserfiche WebLink
SWRCB,January 2002 ! • Page 4 - <br /> 6. PIPING SUMP TESTING <br /> Test Method Developed By: ❑ Sump Manufacturer Industry Standard X❑ Professional Engineer <br /> Other (Specify) <br /> Test Method Used: Pressure Vacuum Hydrostatic <br /> Other (Specify) <br /> Test Equipment Used: VPLT Equipment Resolution: <br /> Sump# 1 PRE Sump# Sump# Sump# <br /> Sump Diameter: 48 <br /> Sump Depth: 5 FT <br /> Sump Material: FIBERGLASS <br /> Height from Tank Top to Top of 14 IN <br /> Highest Piping Pentration: <br /> Height from Tank Top to Lowest 4 IN <br /> Electrical Pentration: <br /> Condition of sump prior to testing: GOOD <br /> Portion of Sump Tested: 1 16 IN <br /> Does turbine shut down when <br /> sump sensor detects liquid(both X❑Yes❑No❑N [:]Yes❑No❑N ❑Yes❑No❑N [:]Yes❑No❑N <br /> product and water)?* <br /> Turbine shutdown response time: 2-5 SEC <br /> Is system programmed for fail-safe ❑ ❑ [:]Y ❑ [:]Yes❑ � ❑ ❑ <br /> Yes N N Yes N N N N Yes No <br /> shutdown?* <br /> Was fail-safe verified to be ❑Yes❑No❑N ❑Yes❑No❑N ❑Yes❑No❑N ❑Yes❑No�i <br /> operational?* <br /> Wait time between applying <br /> pressure/vacuum/water and starting 5 MIN <br /> test: <br /> Test Start Time: 13 :4 3 <br /> Initial Reading(R1): 9.350 <br /> Test End Time: 14 :13 <br /> Final Reading(RF): 9.350 <br /> Test Duration: 30 MIN <br /> Change in Reading(R F-R1 ): 0 <br /> Pass/Fail Threshold or Criteria: .05 GPH <br /> Was sensor removed for testing. Yes N NA Yes N NA Yes N NA Yes No <br /> Was sensor properly replaced and ❑ ❑ ❑ ❑ ❑ ❑ _�I ❑ ❑ f—h, <br /> verified functional after testing? Ye N NA Ye N NA Ye N JNA Yes N <br /> Comments - (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> 1 If the entire depth of the sump is not tested, specify how much was tested.If the answer to any of the questions indicated with an <br /> asterisk(*)is"NO" or"NA",the entire sump must be tested. (See SWRCB LG-160) <br />