Laserfiche WebLink
D.Results of Testing/Servicing <br /> Software Version Installed: 123.01 <br /> Complete the following checklist: <br /> G. Yes r No* Is the audible alarm Operational? <br /> G. Yes No* Is the visual alarm operational? <br /> • Yes No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> • Yes No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with <br /> heir proper operation? <br /> Yes No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> • N/A <br /> • Yes No. Vor pressurized piping systems,does the turbine automatically shut down if the piping secondary containment monitoring <br /> N/A stem detects a leak,fails to operate,or is electrically disconnected?If yes:which sensors initiate positive shut-down?(Check <br /> al/Mat apply)r'Sump/Trench Sensors; r'Dispenser Containment Sensors. <br /> Did you confirm positive shut-down due to leaks and sensor failure/disconnection?tw Yes; r No <br /> Yes r No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no mechanical overfill <br /> prevention valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly?If <br /> • N/A o at what percent of tank capacity does the alar trigger?% <br /> • Yes* r No Nas any monitoring equipment replaced?If yes, identify specific sensors,probes,or other equipment replaced and list the <br /> anufacturer name and model for all replacement parts in Section E below. <br /> Yes* • No Nas liquid found inside any secondary containment systems designed as dry systems?(Check all that apply) <br /> Product; r Water.If yes,describe causes in Section E below. <br /> IT Yes r No* Nas monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> • Yes r No- <br /> s all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E.Comments: <br /> Overfill alarms tested @ 90% <br /> Monitoring System Certification Page 2 of 3 12/07 <br />