INSTALL_2012 - Laserfiche WebLink

Home Browse Search

18.5.2.Owner/operator must determine whether the tank has • Primary Backfill Requirements overfill protection,such as an automatic shut-off device(flap- • TRUCHEK®Brochure per valve)or vent-restriction device(ball-float valve),which will close off the internal piping and reduce the tank's capacity. • Single-Wall Containment Sump Installation Instructions 18.5.3.If a tank has a vent-restriction device(ball-float valve), for Flat-Sided Containment Sumps Xerxes recommends that the tank be gravity-filled only. • Single-Wall Containment Sump Installation Instructions 18.5.4.Owner/operator must notify whoever fills the tank if the for Round-Sided Containment Sumps tank has overfill protection,which reduces the tank's capacity. • Split Backfill Instructions 18.5.5.Before each tank filling,owner/operator or the delivery • Triple-Wall Tank Preinstallation Testing Instructions service must determine the tank's reduced capacity due to the . Two-Part Sealant Mixing/Handling Instructions overfill protection,then consult the instructions or guidelines provided by the installer and manufacturer of the overfill-pro- • Watertight Cover Gasket Replacement Instructions tection device to determine how much additional product the • Wet Well Installation Instructions and Operating Guidelines. tank can hold. 20.1.1.2.Among those materials available from technical sup- 18.5.6.Owner/operator must ensure that the fill line and drop port at Xerxes Minneapolis,MN,are the following: tube are adequately grounded to prevent static discharge dur- ing filling. • Alternate Backfill(Sand)Installation Instructions 18.5.7.Initial fill rate should be controlled to limit the possibil- • Cast-in-Place Deadmen Installation ity of product sloshing. • Deep Burial Installation Guidelines. 19. LIMITED WARRANTIES 21. RETENTION OF INSTALLATION MANUAL 19.1. GENERAL 21.1. GENERAL 19.1.1.Each product Is covered by a product-specific limited 21.1.1.After installation,tank installer must give the Installa- warranty,which contains operating guidelines and parameters tion Manual and the completed Tank Installation Checklist to that should be reviewed as applicable.A copy of the applica- the tank owner. ble Xerxes limited warranty is found in the printed material that accompanies each tank,in applicable product brochures and 21.1.2•After installation,tank owner must retain the Installation at www.xerxes.com.It is also available upon request from the Manual for future reference to operating guidelines.Tank owner Xerxes customer service coordinator. must also retain a copy of the Tank Installation Checklist. 20. SUPPLEMENTAL MATERIALS 20.1. GENERAL 20.1.1.Supplemental materials,which may apply to specific installations and/or conditions,are available upon request from the Xerxes customer service coordinator or from techni- cal support at Xerxes Minneapolis,MN. Most supplemental materials are also available at www.xerxes.com. 20.1.1.1.Among those materials available from the Xerxes customer service coordinator and at www.xerxes.com are the following: • Diesel Exhaust Fluid(DEF)Tank Installation Instructions • Double-Wall Containment Sump Installation Instructions • Field Fiberglass Lay-Up Instructions for Containment Sumps • Flat-Bottom Containment Sump Installation Instructions • Flexible Dipstick Monitoring Instructions • Large Bottom Sump Installation Instructions • Man-Out-of-Hole(MOH)Strap Instructions • New York City Double-Wall Tank Installatior✓iesting Supplement • Prefabricated Deadmen Installation Instructions • Preinstallation Testing Instructions for Water/Wastewater Tanks Factory-Equipped for Pressure Testing 26