Laserfiche WebLink
Pressurized Line Leak Detection Tests (PLL® Option) Page 24 <br /> You can run a PLLD test on all lines or on a single line. This step lets you select 3.0, 0.2,or 0.1 gph line leak tests to run on • <br /> TO START A PLLD TEST the selected line(s). If your system does not have 0.2 or 0.1 gph test <br /> options, you will not see these selections. <br /> In the Operating mode, press G until the display shows: <br /> 10 select 3.O gph test press ©. Press Q to select 0.2 or 0.1 gph <br /> START LINE PRESSUF}E*T€STSa. <br /> PRESS SSTEP>jo CONTjNUE:.y y tests, then press ® . To select the 3.0 gph test, press ©. The <br /> displays shows: <br /> Press ® and the display shows: oaf_ 0.9 s y <br /> 'SELECT LINE _ I .,TEsI� + 'dI <br /> _ALLLINES. <br /> To run the selected test, press ©. The system displays the <br /> Press © to accept all lines. To select a single line, press 0 until message (in this example for all lines): <br /> you see the line you want then press © and ®. The display START uNc resr A L i_INE <br /> below appears: PRESS<ENTER> <br /> SELECT TEST=TYTE - <br /> '3.0GPH _ - - <br /> KEYSYMBOLsr O B-aw O chugs©Enbr©Funct ©mw.(a pfim 0516p©TanWSenaw <br />