Laserfiche WebLink
Wireless Pressurized Line Leak, Detection Tests (WPLLD Option) Page 26 <br /> You can run a WPLLD test on all lines or on a single line. This step lets you select 3.0,0.2, or 0.1 gph line leak tests to run on <br /> TO START A WPLLD TEST the selected line(s). If your system does not have 0.2 or 0.1 gph test <br /> options, you will not see these selections. <br /> In the Operating mode, press Q until the display shows: <br /> To select 3.0 gph test, press ©. Press Q to select 0.2 or 0.1 gph <br /> F s START WPLLD:LINE TEST <br /> PRESS<STEP>TO CONTINUES tests, then press ® . To select the 3.0 gphtest, press ©. The <br /> displays shows: <br /> Press ® and the display shows: <br /> � SELECT LINE1ti9Stt13'�Nu" '�-i - <br /> _ALL LINES 1 To run the selected test, press ®. The system displays the <br /> Press © to accept all lines. To select a single line, press Q until message (in this example for all lines): <br /> you see the line you want, then press © and-©. The display START UNE TEST:nLuuNE y£ <br /> below appears: PRESS'ENTER, <br /> SELECT TEST TYPE%". <br /> 3.0 GPH <br /> KEYSYMBCLS: O B-d '©Change©Ehler O Ponc(bn©Mode 0 Print©S.,aTanWSensw <br />