Laserfiche WebLink
s <br /> Results of U.S. EPA Alternative Evaluation <br /> Liquid Level Sensor <br /> This form documents the performance of the liquid level sensor described below. The <br /> evaluation was conducted by the equipment manufacturer or a consultant to the <br /> manufacturer according to the U.S. EPA's requirements for alternative protocols. The <br /> full evaluation report also includes a report describing the method, a description of the <br /> evaluation procedures, and a summary of the test data. <br /> Tank owners using this system should keep this form on file to prove compliance with <br /> the federal regulations. Tank owners should check with state and local agencies to <br /> make sure this form satisfies their requirements. <br /> Method Description <br /> Name Position-Sensitive Sensor <br /> Version number(s) 794380-323 Position-Sensitive Single Point Sensor for use with <br /> the TLS-350 Series TLS-300 Series EMC Series, EMC Basic, ILS-350, Red Jacket <br /> ProMax and Red Jacket ProPlus <br /> Vendor Veeder-Root <br /> (Name of Manufacturer) <br /> 125 Powder Forest Drive P.O. Box 2003 <br /> (Address) <br /> Simsbury CT 06070-7684 (8 0) 651-2700 <br /> (City) (State) (Zip Code) (Phone) <br /> Evaluation Parameters <br /> The sensors listed above were tested for their abilities to respond to liquids when the <br /> sensors are installed in underground storage tank applications. The following <br /> parameters were determined from this evaluation. <br /> Threshold Levels —The liquid levels at which alarms are triggered. <br /> Precision (standard deviation) - Agreement between multiple measurements of the <br /> same product level. <br /> Detection Time -Amount of time the detector must be exposed to product before it <br /> responds. <br /> Fall Time -Amount of time before the detector stops responding after being removed <br /> from the product. <br /> Specificity - Types of products that the sensor will respond to. <br /> Liquid Level Sensor- Results Form Page 1 of 2 <br />