Laserfiche WebLink
a • <br /> San Joaquin County DIRECTOR <br /> °UI" Environmental Health Department Donna Heran, REHS <br /> ASSISTANT DIRECTOR <br /> 600 East Main Street Laurie Cotulla, REHS <br /> r« Stockton, California 95202-3029 <br /> F PROGRAM COORDINATORS <br /> Carl Borgman, REHS <br /> Mike Huggins, REHS,RDI <br /> gCiF pR�� Website: www.sjgov.org/ehd Margaret Lagorio, REHS <br /> Phone: (209)468-3420 Robert McClellon, REHS <br /> Fax: (209)464-0138 .teff Carruesco,REHS,RDI <br /> Kasey Foley, REHS <br /> April 1, 2008 <br /> Amber Hooten <br /> Tanknology <br /> 677 E Lockeford St <br /> Lodi, CA 95240 <br /> - ----RF,:-Arco-BP-9600, 1250 N Wilson Way, Stockton (SR0053775) - <br /> The San Joaquin County Environmental Health Department (EHD) has completed the <br /> review of the application for permit to install a Veeder Root 794380-323 turbine sump <br /> sensor(91 product) at the above noted address. <br /> The 323 sensor were installed and passed the functionality test during the monitoring <br /> certification inspection on March 26, 2008. The permit has been approved with the <br /> following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board (may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s)of the <br /> component(s) being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 3. Permit expires 180 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> 4. All components must be certified by an independent testing organization and <br /> labeled as required by the organization. (UL, ULC,ANSI, API, ASTM, etc. See <br /> California Code of Regulations (CCR), Title 23 Chapter 16 Table B for complete <br /> Page 1 of 2 <br />