Laserfiche WebLink
California Edition:August.1996 <br /> Vaporless Manufacturing <br /> Vaporless LD 2000E & LD 2000ES <br /> AUTOMATIC MECHANICAL LINE LEAK DETECTOR <br /> Certification: Leak rate of 3.0 gph with Pc=100% and PFA=O%. <br /> Leak Threshold: 2.0 gph (a leak is declared if the output of the measurement system exceeds this <br /> threshold). <br /> Applicability: Gasoline, diesel, aviation fuel and solvent. <br /> Specification: System is installed on flexible piping. <br /> The piping system volume must not exceed 59.6 gallons. 3 ob FT O� <br /> Tests are conducted at the line operating pressure, n'2.t G'T Lll�1 <br /> Waiting Time: There is no waiting period between last dispensing and testing. <br /> There is no waiting period between product delivery and testing. <br /> o <br /> Test Period: The minimum test time (response time) is 30 seconds. <br /> System Features: This system is permanently installed on the piping and automatically tests the line. <br /> It uses a preset threshold and a single test to determine whether the piping is leaking. <br /> If a leak is detected, the LD 2000E will restrict fuel flow to dispenser, and the LD <br /> 2000E-S will shut off the pump. <br /> Calibration: Equipment must be checked annually for capability of detecting a line leak of 3.0 gph. <br /> Comments: Enviroflex piping with a bulk modulus of 1,352 was used during the third-party <br /> evaluation. <br /> Vaporiess Manufacturing Evaluator. Ken Wilcox Associates <br /> 9234 East Valley Rd., Suite C <br /> Prescott Valley, AZ 86314 <br /> Tel: (602) 775-5191 Date of Evaluation: 12/11/92 <br /> 199 <br /> ' Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the <br /> method or equipment. <br /> 427, 31 <br />