Laserfiche WebLink
MODEL LENGTH =ETD+riser-bottom clearance • <br /> DETERMINING MODEL LENGTH <br /> Effective Tank Diameter(ETD)is <br /> the combination of any or all of the GRADE LEVEL <br /> following: <br /> Tank Diameter(to top of 4"bung) C------------ <br /> +Manway ---------- <br /> +Manway <br /> +Sump Adapter <br /> Riser to be determined by bury depth <br /> BURY RISER LENGTH RISER <br /> i <br /> DEPTH MIN. MAX. SUMP <br /> 2' 7° 7" _ ADAPTER <br /> 2.5' 7" 11" <br /> MODEL MANWAY <br /> 3' 7" 17" LENGTH <br /> EFFECTIVE <br /> 4' 7" 29" TANK DIAMETER <br /> (ETD) <br /> 5' T 41" <br /> 61 7 5311 <br /> T 7" 65" <br /> Note:Above ground tanks have a • <br /> minimum riser length of 7"and a -BOTTOMCLKA CE <br /> maximum of 36". <br /> Note:VL2 can be used in 94%of all known installations.The following information indicates certain <br /> installations where a VL1 or VL3 is required: <br /> 1/3 HP USE VL2 IF MODEL LENGTH IS 84-1470. <br /> Use VL1 if model length is shorter than 84 down to 52". <br /> Use VL3 if model length is longer than 147up to 209". <br /> 3/4 HP USE VL2 IF MODEL LENGTH IS 86-149". <br /> Use VL1 if model length is shorter than 86 down to 54'. <br /> Use VL3 if model length is longer than 149 up to 211". <br /> 1 1/2 HP USE VL2 IF MODEL LENGTH IS 89-152". <br /> Use VLl if model length is shorter than 89 down to 57". <br /> Use VL3 if model length is longer than 152 up to 213". <br /> 1 1/2 HP USE VL2 IF MODEL LENGTH IS 90453" <br /> HIGH Use VL1 if model length is shorter than 90 down to 58". <br /> PRESSURE Use VL3 if model length is longer than 153 up to 214'. <br /> W 0z <br /> �� � Z <br /> FE Petro,Inc. • 4805 Voges Road •P.O.Box 139 •NIcFarland,WI 53558 <br /> (608)838-8786 •1-800-225-9787 •Fax:(608)838-6433 <br /> to/or <br />