Laserfiche WebLink
HAZARDO ALYSIS PAG• <br /> UST REMOVAL PROJECT 8400 -96- -004 <br /> FEATURE TANK CONTENT PROFILE/DISPOSE ANALYZED BY/DATE REVIEWED BY/DATE <br /> PRINCIPLE POTENTIAL RECOMMENDED <br /> STEPS HAZARDS CONTROLS <br /> shall be recorded on the daily CQC report. <br /> Preventative maintenance procedures recommended by the manufacturer <br /> shall be followed. <br /> Fire Fire extinguishers shall be suitably placed, distinctly marked, <br /> readily accessible, and maintained in a fully charged and operable <br /> condition. <br /> A dry chemical fire extinguisher with a minimum UL rating of 5 A:B:C <br /> will be readily available. <br /> No smoking or open flames within 50 ft of the work area. (Work area <br /> will be posted) . <br /> All hoses, couplings, fixtures, etc. shall be properly bonded and <br /> grounded. <br /> Fueling Only UL/FM approved safety cans shall be used to store fuel. <br /> Do not refuel equipment while it is operating. <br /> Fire extinguishers shall be suitable placed, distinctly marked, <br /> readily accessible, and maintained in a fully charged and operable <br /> condition. <br /> -------------------------------------------------------------- ----------------- '_ <br /> " <br /> -'--- '----- ------------------ <br /> Sample collection Biological hazards Insp — —Inspect work area carefully and avoid placing hands or feet into <br /> concealed areas. <br /> Be alert for bees, spiders, ticks, and snakes. <br /> Confined spaces Follow procedures for confined spaces. <br /> Contacting Real-time air monitoring will take place. Proper personal protective <br /> contaminated mat'la clothing and equipment will be utilized. <br /> Good housekeeping will be stressed to safe guard against cross <br /> contamination of surrounding areas and eliminate safety hazards. <br /> All site personnnel will practice good personal hygiene. <br /> The work area will be demarcated. All unnecessary personnel will be <br /> kept out of the work area and in an upwind location. <br /> Cross contamination No Exclusion Zone activities are associated with this risk. <br /> Cut hazards Wear adequate hand protection. <br /> Electrical shock All electrical circuits will be deengergized and locked out. <br /> Hazard communications Label all containe*-s as to contents (fuel cans, etc.) <br /> Obtain Material Safety Data Sheets for materials brought on site. <br />